Workmaster 75 fuel gauge problem

   / Workmaster 75 fuel gauge problem #1  

budlite

Silver Member
Joined
May 13, 2008
Messages
120
Location
Toney, Alabama
Tractor
NH Workmaster 75
Got an error code 14052, ground fault error on fuel level sensor. Can't find the darn thing. Downloaded a $20 WM75 repair manual but it's for prior models. Anyone know of a source good for a 2019-20 WM75 manual? Dealer wants in excess of $500 for a hardcopy.
 
   / Workmaster 75 fuel gauge problem #2  
Are you saying you can't find the fuel level sensor? If it doesn't screw into the tank from the top then it is very likely part of the fuel pump assembly. My S x S is like that.
 
   / Workmaster 75 fuel gauge problem #3  
From the parts illustration on messicks site it looks like fuel level sensor is in a recess area on top of your fuel tank to the right of your fuel cap on inboard side of tank. Hope that helps you find it so you can check the wiring harness.
 
   / Workmaster 75 fuel gauge problem
  • Thread Starter
#4  
Thanks Rusty A I was able to find the sensor location thanks to your help. Got a broken wire, have to remove tank to be able to fix, so I guess I will just keep it filled instead of relying on fuel gauge.
 
   / Workmaster 75 fuel gauge problem #5  
Glad you found the open circuit.
 

Tractor & Equipment Auctions

2007 GMC C4500, Cab and Chassis, 4x4, Duramax (A47371)
2007 GMC C4500...
2014 VOLVO VNL DAYCAB (A47001)
2014 VOLVO VNL...
1992 Ford Supply Truck (A47307)
1992 Ford Supply...
12-Wheel Pneumatic Pull-Behind Asphalt Compactor (A45336)
12-Wheel Pneumatic...
48 HENDRIX CONSTRUCTION BUCKET (A47001)
48 HENDRIX...
2006 HUMVEE UTILITY VEHICLE (A47001)
2006 HUMVEE...
 
Top