WR long valve installed

wickedinhere · Sep 30, 2006

I got my valve kit in yesterday and i installed it today with the help of TBN.
Here is a few pics its a really nice kit i really like the switch on the loader knob.
I am waiting on my grapple to come in and i will be all set.

jmc · Sep 30, 2006

From those pictures, it looks like you are only half done! I just mounted one too and those hoses from the valve to the front were the most work, especially getting the front quick-connects mounted in a bracket so they aren't flopping around.

John

wickedinhere · Sep 30, 2006

Yeah i have a little more work to do but i am waiting on my grapple to get here before i run the lines to the front.

bones1 · Oct 13, 2006

Which WR Long model did you guys use for a grapple?

PineRidge · Oct 13, 2006

Can't tell from your pictures, when you drop the FEL does the valve stay with the tractor or the FEL?

Boomerang1 · Oct 14, 2006

In the first photo, it looks as if the photographer was standing under the raised loader arm. I hope it was blocked up for safety.

wickedinhere · Oct 14, 2006

When you call them you just tell them which loader you have and they will match the valve kit for your loader. The valve mounts to the tractor where the fel bolts to it. Why does the fun police always come out? Sorry to disappoint you but i wasnt standing under the fel while it was in the air. PEOPLE LIKE YOU REALLY GET ON MY NERVES. Sorry guys i just had to say that anyway you can see pics of the grapple install in attachments just look for "ebay grapple". I would have replied earlier to your responses but i was busy smashing my head with my fel.LOL

ovrszd · Oct 14, 2006

wickedinhere said:
When you call them you just tell them which loader you have and they will match the valve kit for your loader. The valve mounts to the tractor where the fel bolts to it. Why does the fun police always come out? Sorry to disappoint you but i wasnt standing under the fel while it was in the air. PEOPLE LIKE YOU REALLY GET ON MY NERVES. Sorry guys i just had to say that anyway you can see pics of the grapple install in attachments just look for "ebay grapple". I would have replied earlier to your responses but i was busy smashing my head with my fel.LOL

Good One!!!

MadReferee · Oct 14, 2006

PineRidge said:
Can't tell from your pictures, when you drop the FEL does the valve stay with the tractor or the FEL?

On my B2710 WR Long supplied a mounting plate that bolts to the loader frame tower just below the loader valve. It uses two of the bolts that hold the loader valve in place. It is a permanent installation. It looks like for this installation the WR Long valve was mounted to the frame tower cross arm.