jigs_n_fixtures
Veteran Member
I found a 6-ft snowplow on Craig's List.
The picture of the front looked ok but his description was strange, so I asked for photos of the back. And got this:
Am I wrong, or did he weld a SSQA adapter for his FEL onto the blade, so to swap between his blade and bucket he has to go the pins route. If he had welded on an SSQA adapter plate I would probably buy it. But, I don't need another project.
I just checked Amazon, and you can get a Chiwanese weld on plate for an implement for around $100.
The picture of the front looked ok but his description was strange, so I asked for photos of the back. And got this:
Am I wrong, or did he weld a SSQA adapter for his FEL onto the blade, so to swap between his blade and bucket he has to go the pins route. If he had welded on an SSQA adapter plate I would probably buy it. But, I don't need another project.
I just checked Amazon, and you can get a Chiwanese weld on plate for an implement for around $100.
Last edited:
