You hit the nail on the head Roger, the old Ford's only had the three point draw bar. They came with a set of stabilizer bars to lock it at the correct hieght and the lock to keep it from truning in the balls. One dissingaged the lift when the draw bar was used. But farmers being farmers, they seldom used them. We like to think we are fast enough to catch it. I remember a neighbor pulling his pick up truck with one, was on a black top road. When the truck driver let the clutch out the tractor came over backwards so fast he never knew what happened. Truck didn't start, tractor didn't get damaged, buried him that week.
WTB: drawbar
- Thread starter gws
- Start date
- Views: 2886
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Inspector 507, where can you get that drawbar lock. I cobbled one.. but a factory one like that is much nicer than mine.
Soundguy
Soundguy
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Tractor supply co. carries at least one size of swinging drawbar.. perhaps a few measurements might make the determination.
Soundguy
Soundguy
couchsachraga
Gold Member
- Joined
- Dec 26, 2001
- Messages
- 306
- Location
- Adirondacks, NY, USA
- Tractor
- John Deere 4520 cab... formerly Yanmar 336D
WOW
Frightening article Roger_Scotty! That'll certainly keep me hooking things up to the fixed drawbar.
When I purchase my YM336 the fellow who dropped it off (from the dealer) pointed out that ROPS only work if you're wearing the seat belt. It's a good point, and one of these days I'll point out to him that the seatbelt is rusted shut...(another project for the week-free the seat belt!).
Keepin' the Greasy side DOWN,
Couchsachraga
Frightening article Roger_Scotty! That'll certainly keep me hooking things up to the fixed drawbar.
When I purchase my YM336 the fellow who dropped it off (from the dealer) pointed out that ROPS only work if you're wearing the seat belt. It's a good point, and one of these days I'll point out to him that the seatbelt is rusted shut...(another project for the week-free the seat belt!).
Keepin' the Greasy side DOWN,
Couchsachraga
roger_scotty
Gold Member
"....very worthwhile reading at that url. Makes me think my prior actions may have been just dumb luck. Jerry YM1700 2WD "
Jerry, I feel the same way. I know that I used to use (and recommend) that same stupid 3pt drawbar before I figured it out. And my prior actions were just dumb luck too. I can even remember being in odd positions with that drawbar and having the tractor start to lift....With my typical bullheadedness I would simply reposition everything and try again. Probably the only thing that saved me from myself was a natural tendency is to go slow and feather the clutch rather than to yank on something.
Jerry, I feel the same way. I know that I used to use (and recommend) that same stupid 3pt drawbar before I figured it out. And my prior actions were just dumb luck too. I can even remember being in odd positions with that drawbar and having the tractor start to lift....With my typical bullheadedness I would simply reposition everything and try again. Probably the only thing that saved me from myself was a natural tendency is to go slow and feather the clutch rather than to yank on something.
BrettW
Platinum Member
Is there a safe way to pull trees out of woods with a 3 pt draw bar, and what advantage is a frame mount if the 3 pt stays low? thanks, bw
Inspector507
Super Member
Soundguy,
I ordered mine online..................not if only "old-timers" would let me remember where /w3tcompact/icons/laugh.gif
I know SpeeCo.com has them, thats where the picture came from.
I ordered mine online..................not if only "old-timers" would let me remember where /w3tcompact/icons/laugh.gif
I know SpeeCo.com has them, thats where the picture came from.
jimstractors
Gold Member
I mounted a 2" trailer ball on my box scraper and use that to move trailers around. I can also wrap a chain around it for pulling. I keep the box low so that it will bottom out if the load is too heavy. That way I can't do the 'back flip' thing. I also have a loader which adds a lot of weight up front.
Jim
Jim
