jrsavoie
Gold Member
- Joined
- Jul 10, 2010
- Messages
- 475
- Location
- Clifton, Illinois
- Tractor
- 1975 Ford backhoe/loader 3 cylinder diesel, 2022 Kubota LX2610, 1963 John Deere 4010 diesel wide front, 1996 Toro 223D Groundsmaster, 1998 Toro Groundsmaster 325D 4x4 72" deck cab & snowblower
WTB shifter lever for 1994 NV4500 - 5 speed manual GM and Dodge trucks
We have found ourselves in dire need
The jam nut was run all the way down and the shifter threaded down to it. the shifter would turn but not back away from the jam nut. We pulled the shifter lever apart before we were done. It was easy to see somebody had been there before us. Channel lock or vise grip marks on the bottom part of the shifter that you would normally never see.
I think they managed to strip the threads somehow and epoxied it or something
We have found ourselves in dire need
The jam nut was run all the way down and the shifter threaded down to it. the shifter would turn but not back away from the jam nut. We pulled the shifter lever apart before we were done. It was easy to see somebody had been there before us. Channel lock or vise grip marks on the bottom part of the shifter that you would normally never see.
I think they managed to strip the threads somehow and epoxied it or something