Mowing wtk JD3X20 midmount mower

jblack · Oct 5, 2005

First post ever - I have a JD3320 with 72 MMM and turfs. Have third SVC and 300CX. Something to keep in mind is that using loader and MMM together is a bit difficult. MMM ground clearance isn't the best. It takes about 5 min to unhook MMM. The problem is the MMM takes up so much space on the garage floor when disconnected from tractor. You will love the MMM.

jeffinsgf · Oct 5, 2005

</font><font color="blue" class="small">( .... The problem is the MMM takes up so much space on the garage floor when disconnected from tractor. ...)</font>

You need one of these

jblack · Oct 5, 2005

That's it! I have been contemplating on building a stand for this winter but, I am going to purchase the wheel stand you forwarded to me instead. There are some real geniuses on this site. Thanks for replying to my post.

ddivinia · Oct 5, 2005

Can you post a pic of it with the MMM installed?

I would like to see how high the deck goes - ground clearance question.

Where is the control for the deck heigh?

Thanks,
D.

jblack · Oct 5, 2005

D -

Sorry - I don't know how to post pictures...first time on this site.

Ground clearance is about 12-18" with MMM in up position. Got stuck trying to spread sand around my pond's beach this spring. Needed to take off MMM to complete sand spreading. I mow 3 acres every week with it so it stays on pretty much all summer. It takes literally 5 minutes to take it off.

The lever that raises and lowers the deck is on the right hand side in front of rear 3-PT lever. The MMM lever is between the 3-PT control and the FEL control...understand???

JB

keeney · Oct 5, 2005

In regards to:

( .... The problem is the MMM takes up so much space on the garage floor when disconnected from tractor. ...)

and

"You need one of these "

I find that the perfect place to store the mower deck is to slide it under the boat trailer. Especially when the mower is off for the winter and the boat is in the garage to stay for the winter.

Its a great excuse to get a boat and another garage stall to keep it in.

- Rick

kennyd · Oct 5, 2005

I just got a set of the MowerAxles from Larry 2 weeks ago. They are well worth the price, and he is a great guy to deal with. I am using them on my 60" MMM.

Take a look at mine...