www.chinabestproducts.com

[TobaccoRoad]

Re: [url]www.chinabestproducts.com[/url]

Hey Lee,

I ordered from Chip and I received from Chip, exact item and on time. All inquiries were responded to in less than 24 hours.

Good Luck,
TR

 

[green_buyer]

Re: [url]www.chinabestproducts.com[/url]

Hi to All of you.

Lots of good advice given. Thank you.

I secured a verbal deal over the phone soon after I posted my last post here. And today I am confident inside that I am dealing with a good dealer.

Good honest hard working people are sometimes hard to find.
And time will tell if I made a good decision. I will report how it goes.

I learned that the 454 Jinma's are EPA aproved now and are being to be shipped into the US. A very nice looking tractor. That is what I ordered. I wanted the 354, but I leared by reading the past posts here on Tractorbynet that the 354 go's to fast for a tiller. And the 354 does not have a creeper. So I was left with going up or down in size so that I would be able to get a creeper, or switching manufacturers all together. I decided to go up one size in a Jinma.

My new tractor should arrive sometime inside of April. I am looking forward to putting it to work with a big happy grin.

Thanks again you all.
Lee.

 

[bluechip]

Re: [url]www.chinabestproducts.com[/url]

A KAMA TS354C or TS354X is available with creeper. Just for the benefit of others reading this thread....We are stocking both versions.

 

[psj12]

Re: [url]www.chinabestproducts.com[/url]

I recently received a Kama 554 tractor from Chip and I am quite happy with the deal. It is exactly as ordered exactly when promised. As TobaccoRoad stated I have always received a response from Chip within 24 hours. Some of my requests have been strictly for information but Chip took the time to answer all my questions.
While the tractor had some minor initial problems they were quickly rectified by Chip. I went and saw him unannounced to get some repair/warranty parts. He took time from a very busy tractor trailer unloading job to obtain the necessary parts for me. He did not have the required seals in stock so he dissassembled a part to provide the required seals.
Sometimes the lower price is not worth the loss of service!