X728
- Thread starter Fensty77
- Start date
- Views: 1793
oldnslo
Super Member
Is it the engine or transmission cogging when warm?
oldnslo
Super Member
The 728 is fuel injected so could be spark - ignition or fuel. Have you checked to verify spark when warm? Ignition modules and spark plugs have been known to fail when warm but operate correctly when cold.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,458
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
What is "cogging" ?? Not familiar with that term.
oldnslo
Super Member
My interpretation was missing or misfiring on one or both cylinders. I could be 110% wrong though.
My x720 had a similar problem that was caused by rust from the fuel level housing clogging the fuel filter. Mine lost power after running for about an hour, and letting it cool down helped so I initially thought it was electronic or other heat related problem like lownslo, but when I pulled the fuel pump to test it I saw the filter was full of rust. Didn't make sense why it only did it when hot, but flushing the tank solved the problem.
Z71
Gold Member
fyi
There is a service manual for X728 for sale in the "Items for Sale" forum
www.tractorbynet.com
There is a service manual for X728 for sale in the "Items for Sale" forum
John Deere Technical Manual
X700, X720, X724, X728, X729 Service Manual 562 pages in like new condition. Traded in X728 for X738 and this is not applicable. $133.70 new; sell for $75 (including Postage in USA.) Ships from Michigan 49934
www.tractorbynet.com
“Cogging' is a general term (possibly even a colloquial term) used to describe a brushless motor appearing jumpy or jittery. It is much more prevalent at lower speeds than higher as high speeds tend to smooth out the motor considerably.”