Yanmar 2200 Drowned??

   / Yanmar 2200 Drowned?? #12  
I would turn the motor over by hand, either with a wrench on the crankshaft or a screwdriver on the flywheel to make sure it isn't hydro locked and then change the oil. Once you get it running, get it up to temp, then change the oil again!

David from jax
 
   / Yanmar 2200 Drowned??
  • Thread Starter
#14  
What can I say? I have been a lurker. I love reading all the posts on TBN but rarely have anything worth adding. My advice is worth what I charge for it - bupkis!

Thanks to everyone for the good information. I'll be opening this can of worms when I get a free weekend and will give you a report on what I find.

John.C.
 
   / Yanmar 2200 Drowned?? #15  
Welcome to the posting world at TBN! (And a great quote by the way.)

I hope that this turns out to be simple for you.

All the best,

Peter
 
   / Yanmar 2200 Drowned?? #16  
I'll be opening this can of worms when I get a free weekend and will give you a report on what I find.

John.C.
My thoughts are, if there is any chance of water in the cylinders, I would make it a very high priority! It won't take long for water on those unprotected cylinder walls to make a mess out of a good engine! Even if it has been a while since the roof collapsed, it might make a difference to shorten the time by as much as possible.
David from jax
 

Tractor & Equipment Auctions

2024 New Holland T8.410 MFWD Tractor (A55314)
2024 New Holland...
2015 JOHN DEERE 1050K WH CRAWLER DOZER (A52707)
2015 JOHN DEERE...
2022 Kubota Z422-54 Zero Turn Mower (A56435)
2022 Kubota...
2017 CATERPILLAR 259D SKID STEER (A52709)
2017 CATERPILLAR...
2018 Freightliner Bucket Truck (A55973)
2018 Freightliner...
2015 Peterbilt 389 T/A Sleeper Cab Truck Tractor (A55973)
2015 Peterbilt 389...
 
Top