Yanmar 3110D

[Jose]

Hi for all of you,

I’ve got a Yanmar 3110D and would like to know how the gear box work since it seems it comes with two gear box. One is automatic (N -> 1 -> 2 -> 3) and the other come with C -> 1-> 2 -> 3 -> 4. How to work with this gear?

Rgds

Jose
Mozambique

 

[blackd]

One is a range selector, and the second is the gear selector within the selected range. The one with the regular gear shift is the range, and requires use of the clutch to shift. The other with the push button is the gears within that range. It can be changed without the clutch. There should also be a "R" before the N-1-2-3. This xmission can be shifted directly from forward to reverse. I don't recommend it unless going very slow, but it is great for loader work.

 

[Jose]

Hi,

So what is "C" for? If I use , for instance, on range selector "3", which gear can I use for speed?


Rgds

Jose

 

[Jose]

Another thing: Why did you say "great for loader work"?

Sorry for all this question but I would like to understand how this works!

Rgds

Jose
Mozambique

 

[HoyeTractor]

It is good for loader work because you are typically doing repetitive forward/reverse shifting. The ol' clutch mashing leg gets tired after a while. With the powershift you dont need the clutch. Creep is V E R Y slow and is great for tilling. On some tractors it is hard to tell if the tractor is actually moving.

Aaron
Parts@HoyeTractor.com
(940)438-0386

 

[blackd]

As Aaron said "C" is for creep. All the gears will work as in the other ranges. Just slow, slower, slowest etc.

 

[Jose]

Hi,

I know it could be boring, but if I want to movie on the road with relative speed, which gear do I must use? What I understanding the reverse and forward is made by the automatic gear (R, N, 1,2,3,)!


Rgds


Jose

 

[mark777]

Jose, 3rd gear in range 4 should give you road speed (top speed) and dont think you wolud want to use any implements at / in that range. BTW How did you make out with the FEL measurements? Mark

 

[Jose]

Hi Mark,

Tnx for all your support. Regarding FEL I didn't yet. I’m looking all pictures I can get on Internet before I decide to make my self one. Will be hard job because I can’t get any plans and using only picture will be complicate.

Rgds

Jose

Mozambique

 

[Tractors4u]

You can get plans here Cadplans.

 

[Jose]

I know that. But there's no way at moment send money to outside. There’s a rule here in Mozambique that becomes very difficulty to send outside money! Tnx nway.

Rgds

Jose
Mozambique

 

[MarkStewart]

Here are some free loader plans. I don't know if they would be much help to you. You will need adobe acrobat
reader to read the file(it's in .pdf)
get it at www.adobe.com
free loader plans

 

[Jose]

Hi,

For sure will be helpful!

Tnx pal

Rgds

Jose


Maputo - Mozambique /forums/images/graemlins/wink.gif

 

[ducksjunk]

Mark; Would like to see those loader plans. The link you provided doesn't appear to work. I just get page cannot be displayed.

 

[Jose]

Hi

One thing more: does any one know which front tire’s size use this tractor (3110D)?

Rgds


Jose

Mozambique

 

[MarkStewart]

Sorry about that. I think you can see loader plans here web page