yanmar 48" mower deck spindle replacement,where to buy part

[glennvs]

where to buy spindle replacement for 48"yanmar deck

 

[sld]

Can just replace the bearing? Much cheaper.

 

[glennvs]

no the top housing is broke at top where bearing seated

 

[BukitCase]

Got a model number? Is this a yanmar tractor, or what? Need a bit more to go on, but might have a source or two.

Not all spindles are created equal - bought a set to rebuild the crappy deck on my Cub RZT50 last year, ended up with Oregon brand stuff. Built probably half again as well as original.

Please post make, model and anything else (maybe a pic or two of spindles), and I'll give it another shot... Steve

Oh, and if you know who REALLY built your rig for whoever put their name on it, include that -

 

[glennvs]

It says yanmar on deck 48" has #21879500048 on plate, 4 bolt housing ,shaft 5" long, the top of housing is about 2 1/2" high . Can't get hold of daughter for kind of tractor, I do know it's a diesel well so much for cell phones no one ever answer them.

 

[oliver28472]

glennvs, is this tractor a 3-digit model number? If so, the deck may have been made in the US. I have a 48" Yanmar tiller that was made in the US. If you can post several pictures of the deck, it might help identify it. Woods made some decks for other companies. Here is a recent post showing a Yanmar belly mower. Is this similar to yours?

http://www.tractorbynet.com/forums/yanmar/287994-ym-146-mid-mount-mower.html

 

[glennvs]

It's a yanmar tractor model#17666 so the daughter says ,she found some paper work.