Yanmar F16d ring and pinion

junkers · May 18, 2015

No accessories came with it. if it had a loader then that would shed a different outlook on the worth..
the bad ring and pinion gear was already removed by the seller but they put back the axle as a front two wheel drive
PS then the seller sent the gears to Chattanooga,tn to a shop guy who then lost the old gears

winston1 · May 19, 2015

The old saying "your between a rock and a hard place" may apply here. I wish you the best with what ever you decide.

clemsonfor · May 19, 2015

NOt sure the exact size of it but i assume its a 16HP tractor at the pto...or similar size to the old 1500 and its got more of an auto transmission type.

I would think you could get $2000-2500 for it.

But like winston said its parts are worth well more than that.

The Ring gear set is easy $500 used!!!

Engine $500-800 easy id thing...tires are $300 with the rims easy i would think depending upon condidtion. trans section i think could bring $1500 alone with the good ring gear. The more you part out the more that money would come back.

And what i should of made clear on my earlier post is that $350 for the chevy ring set was an aftermarket and one of the cheaper ones. If i would of bought a big name set or gone to the delater your closer to the $500 mark which is not that far off of you and like i said thats for a common rear end in a pickup truck.

normde2001 · May 19, 2015

junkers said:
I paid $ 800.00 for the tractor and if I add $750.00 thats $1,550.00 that I would have in the Yanmar F16D 4X4
is that top on what that tractor would bring ?
No accessories came with the tractor

Your tractor is worth $5000 in good running condition.

duanew1 · May 21, 2015

I think I saw that one on Craigslist. I decided to pass on it because it was not the line of yanmars that I like. Good luck with the fix. I think it is worth it to buy the gears if you need a tractor.