Yanmar YM2002D

   / Yanmar YM2002D #1  

whistlepunk

New member
Joined
Mar 19, 2024
Messages
8
Tractor
YANMAR YM2002D
Looking for a good 3T80U-NA good engine block. any avenues in trying to locate a good one would be much appreciated.
Thanks in advance.
 
   / Yanmar YM2002D #2  
Looking for a good 3T80U-NA good engine block. any avenues in trying to locate a good one would be much appreciated.
Thanks in advance.
The 3T80U as a base engine came in several variants. It's possible some of the other variants would work as well.

Have you looked for a complete engine?
 
   / Yanmar YM2002D #3  
Other possible engines to work would be,

The Yanmar YM1820 has the 3T80U-NB and the YM2002 has the 3T80U-NA, YMG2000 has the 3T80U-SA.

No domestic Yanmar was sold with a 3T80U engine. The U designation means, the engine has no cylinder sleeves.
Yanmar made the JD750 for Deere. It has the 3T80UJ engine. It's possible to match it to your engine.

You could just buy a complete engine of the 3T80UJ and put it in your machine.

Shop around.
Here i one example,
Another with a B+ rating

1711069285478.png
 
Last edited:
   / Yanmar YM2002D #4  
   / Yanmar YM2002D #6  
I'm showing a Ym2002 @24Hp. 3Cyl. Gear drive. And there is a Ym2010 Complete tractor 24Hp. 3Cyl. Power shift Super Cheap. Asking 500.00$
Facebook Market Ga.. The Tractors location is listed in Morrison TN.
Runs parked for Trans. Problems.
 
   / Yanmar YM2002D
  • Thread Starter
#7  
I'm showing a Ym2002 @24Hp. 3Cyl. Gear drive. And there is a Ym2010 Complete tractor 24Hp. 3Cyl. Power shift Super Cheap. Asking 500.00$
Facebook Market Ga.. The Tractors location is listed in Morrison TN.
Runs parked for Trans. Problems.
are the engines compatible? would I be able to bolt this ym2010 engine up to my ym2002 ?
 
   / Yanmar YM2002D #8  
are the engines compatible? would I be able to bolt this ym2010 engine up to my ym2002 ?
I think it does 2002D 82-83 2010 80-81 So not much doubt it should!
 
   / Yanmar YM2002D #9  
Looking at the piston size
YM2010 EP-9369 (82mm)
YM2002 EP-1567(80mm)
pretty much assures me of that!
 

Tractor & Equipment Auctions

2020 CATERPILLAR 326 EXCAVATOR (A51242)
2020 CATERPILLAR...
2012 FREIGHTLINER CASCADIA (A50854)
2012 FREIGHTLINER...
1989 Freightliner FLD120 (NEW CAT 3406A, NEW REAR ENDS, CLUTCH) (A51039)
1989 Freightliner...
2019 Ford F550 4x4 Bucket Truck with Altec AT41 Boom - 46FT Working Height and Jib Winch (A51039)
2019 Ford F550 4x4...
2015 FREIGHTLINER M2 DAY CAB (A51222)
2015 FREIGHTLINER...
1049 (A50459)
1049 (A50459)
 
Top