ym 2610 chargin

[dwingert2]

well i put the gm alternator conversion on that someone posted a link to from ebay and it seems to be working well we had narrowed the problem down to either the generator or alternator because we couldnt see anything shorting out and i cleaned and replaced all wires and was still getting smoke from the old generator the only problem we still have is no headlights doing the conversion you disconnect the plug/harness that is plugged into the regulator does anyone know if the headlights are wired through this harness? if it is then that may be the reason for no headlights before if the reg. was shot and not putting out the correct power to the headlights and now that it is disconnected it deffinatly wouldnt work we are thinking about putting some chevy headlights in it and just running all new wires for them. sorry for the long post.

 

[kenmac]

I dont know how they come wired but, you could just run a hot wire from the batt to a switch (fused) from a switch to the lights

 

[dwingert2]

just an update ive been using the tractor with no problems since i put the gm alt.on fires rite up charges properly so i would recomend the ebay kit and also just fyi when i bought the kit from the guy hes local so i just went and picked it up he said he didnt have any on ebay at them time because it was winter and that once it started to warm back up he would post some more for sale.