YM1802D Clutch housing broken

[DavesTractor]

I need a clutch housing for a Yanmar YM1802D or 2002D. I have a customer that cracked his...BIG crack. If any of you are parting out such a tractor or know of someone who is, please let me know.

Meanwhile, put a subframe under the tractor if you want to run a backhoe and a loader on one of these fine little Yanmars. The stresses in the center of the tractor take their toll over time.

Thanks,

 

[normde2001]

Dave, as a last resort, a good shop could probably weld that for you. At least to make structurally sound, and fill in any leaks with "JB".

 

[DavesTractor]

Norm,

You're probably right regarding the welding. It is the dry section of the trans, so being fluid tight isn't an issue.

Thanks for the input.

Dave