Dec 20, 2014 / Zerk fails to take a grease shot Thread Starter #11 OP M meos1 Silver Member Joined Sep 5, 2014 Messages 228 Location York, SC Tractor Kubota BX2370-1 Good point of diagnosis on taking them out and trying to see if grease passes. Its definitive. Thanks!
Good point of diagnosis on taking them out and trying to see if grease passes. Its definitive. Thanks!
Dec 20, 2014 / Zerk fails to take a grease shot #12 J JoeBee New member Joined Jul 25, 2006 Messages 8 I had same problem. Found taking pressure of joint where zerk was, by putting down pressure on bucket, allowed zerk to take grease.
I had same problem. Found taking pressure of joint where zerk was, by putting down pressure on bucket, allowed zerk to take grease.
