CHDinCT
Veteran Member
It's done! Traded in my BX1860 for a BX25. Signed the papers on Tuesday and my new BX25 will be delivered sometime next week. Dealer said they might be able to get it to me by the end of the week, but I told them it was actually better for me next week when things calm down from the holidays - maybe I'm a bit nuts for saying that after thinking it over today. :confused2:
For those following my recent posts, including this thread in the Kubota Owning forum, ( http://www.tractorbynet.com/forums/kubota-owning-operating/191487-woods-bh6000-bx-question.html ) it was all about getting the backhoe for my BX. I spent a lot of time looking into the Woods BH6000 and for a while had my BX for sale on CL with plans of trading it in on for a BX25. I had what seemed to be a firm buyer about a week or so ago, then, poof, the guy backed out last minute.
It was a tough call taking a pass on the Woods BH6000. I got quotes from low $5K's from an out of state Woods dealer to well over $7K locally. Still, the problem became that Woods doesn't officially offer the BH6000 for the BX1860 or 2360 for that matter, and they were of no help trying to figure out if the subframe for the BX1850/2350 would work on my 60 series. I won't rehash the details (see linked thread for those), but I'm 99% sure the subframe for the 50 series would work. I just didn't like not having support from Woods for any issues should I have run into them. Plus, I couldn't swallow the price locally so I'd would have had to order it from a dealer in Michigan and then not have local selling dealer support for warranty issues, etc.
Add to this that I'd likely have to remove the dual rear remote set up on my BX1860, remove and relocate my forward facing ROPS lights and my rear work light. The valve for the rear remotes mounts to the side of the HST and it looks like there would be interference with the Woods subframe. Even if it didn't interfere, I'd have to relocate the 4 quick connect ports at the back of the tractor since they'd be in the way when sitting facing rearward to operate the BH. All in all, it added up to a lot of work on top of the subframe and backhoe installation and I have a lot of other honey do's and projects of my own already waiting. I will have to add work lights to the BX25 in fairly short order however.
There are a few things I liked better about the Woods hoe, however. One is the integrated bosses for mounting a Woods pin on thumb. That was appealing as I know there wouldn't be any movement of the thumb as can happen with the bolt ons, plus it would be easy to remove when not needed. The other advantage is a float mode on the boom raise/lower function. Supposedly, you can dig easier by putting the boom in float so that as you crowd the dipperstick in towards the tractor, the boom will float up on its own and prevent the tractor from being pushed backward. I suppose in time you get good at adjusting the boom as you dig with the dipper. Kubota doesn't have this on the BX25. Bet it's on the next update though.
I also want to say that I briefly considered trading out to a small B - B2320 or B2620 - after earnestly following BPfick's trade up experience, but I can honestly say that my BX is the right size for my current 2 acres. Ground clearance, as long as the MMM if off, is not an issue for me. Going to a B would have been more costly anyway, not just for the tractor and BH, but also because I'd have to replace my current MMM and front blade that wouldn't transfer over.
So, I'm looking forward to getting the BX25 even though I won't be using the BH until next Spring. I will use the time between now and delivery to reorganize my shed. I already ordered the BXpanded BH and FEL dollies since rolling them into corners of my shed is the only way they'll both get in there with the tractor when they're off. Will post pic's when the new unit arrives.
Happy New Year
For those following my recent posts, including this thread in the Kubota Owning forum, ( http://www.tractorbynet.com/forums/kubota-owning-operating/191487-woods-bh6000-bx-question.html ) it was all about getting the backhoe for my BX. I spent a lot of time looking into the Woods BH6000 and for a while had my BX for sale on CL with plans of trading it in on for a BX25. I had what seemed to be a firm buyer about a week or so ago, then, poof, the guy backed out last minute.
It was a tough call taking a pass on the Woods BH6000. I got quotes from low $5K's from an out of state Woods dealer to well over $7K locally. Still, the problem became that Woods doesn't officially offer the BH6000 for the BX1860 or 2360 for that matter, and they were of no help trying to figure out if the subframe for the BX1850/2350 would work on my 60 series. I won't rehash the details (see linked thread for those), but I'm 99% sure the subframe for the 50 series would work. I just didn't like not having support from Woods for any issues should I have run into them. Plus, I couldn't swallow the price locally so I'd would have had to order it from a dealer in Michigan and then not have local selling dealer support for warranty issues, etc.
Add to this that I'd likely have to remove the dual rear remote set up on my BX1860, remove and relocate my forward facing ROPS lights and my rear work light. The valve for the rear remotes mounts to the side of the HST and it looks like there would be interference with the Woods subframe. Even if it didn't interfere, I'd have to relocate the 4 quick connect ports at the back of the tractor since they'd be in the way when sitting facing rearward to operate the BH. All in all, it added up to a lot of work on top of the subframe and backhoe installation and I have a lot of other honey do's and projects of my own already waiting. I will have to add work lights to the BX25 in fairly short order however.
There are a few things I liked better about the Woods hoe, however. One is the integrated bosses for mounting a Woods pin on thumb. That was appealing as I know there wouldn't be any movement of the thumb as can happen with the bolt ons, plus it would be easy to remove when not needed. The other advantage is a float mode on the boom raise/lower function. Supposedly, you can dig easier by putting the boom in float so that as you crowd the dipperstick in towards the tractor, the boom will float up on its own and prevent the tractor from being pushed backward. I suppose in time you get good at adjusting the boom as you dig with the dipper. Kubota doesn't have this on the BX25. Bet it's on the next update though.
I also want to say that I briefly considered trading out to a small B - B2320 or B2620 - after earnestly following BPfick's trade up experience, but I can honestly say that my BX is the right size for my current 2 acres. Ground clearance, as long as the MMM if off, is not an issue for me. Going to a B would have been more costly anyway, not just for the tractor and BH, but also because I'd have to replace my current MMM and front blade that wouldn't transfer over.
So, I'm looking forward to getting the BX25 even though I won't be using the BH until next Spring. I will use the time between now and delivery to reorganize my shed. I already ordered the BXpanded BH and FEL dollies since rolling them into corners of my shed is the only way they'll both get in there with the tractor when they're off. Will post pic's when the new unit arrives.
Happy New Year