Search results

Anyone blowing snow with a skid steer? Sold my tractor this spring and bought a skid steer. Putting a hydraulic blower on it. I STRICTLY do rural vacation homes and some of them are reasonably steep. Not blowing on a regular basis, only when the straight blade guys can't push it any more or if...

Anyone blowing snow with a skid steer? Sold my tractor this spring and bought a skid steer. Putting a hydraulic blower on it. I STRICTLY do rural vacation homes and some of them are reasonably steep. Not blowing on a regular basis, only when the straight blade guys can't push it any more or if...

At this time i am STILL having emission issues with my XR3037C I have owned it a little over 4 years and it has been worked on 8 separate times. I was hoping for a buyback as they have 4-5 early gear drive units bought back and sitting in California but due to company restructuring they are...

I'VE HAD IT!!! Today i called DLL who i have the tractor leased through to get them involved. This ReGen BS started in September of 2015 when the tractor was 14 months old and 192 hours. I have 554 hours on it now. Area rep won't return calls, Dealer don't want to see it in his yard again...

Not really the dealers fault. He's just doing what corporate is telling him. Tractor is 37 months old and has been doing this since it was 9 months old. THEY CAN'T FIX THE **** THING!!!! Now that it's cooled down its pulling the same BS again. I was out cutting firewood today and just...

Still BS regen issues. 1st time at the dealer they thought it was lack of fuel for the burners. Vented the fuel cap better. Still went into limp. The dealer then made a 400 mile round trip to put a smaller pulley on the air pump. Still did it and DPF got clogged. I pulled out the...

For the last 1 1/2 years i have been having regen problems. I have a couple posts here about them. It has been to 2 dealers in Montana and now 1 in Wisconsin since i moved here. Before i left Montana the head LS factory guy out of Oregon came to my house and put a DPF in it and ran...

Need better lighting for blowing snow this winter. Any experience with these folks??? 24" Bundle With Two 4" Pods – Light Bar Supply

Hi folks, Looking for a wider blower for my LS XR3037C gear drive. Currently have an Allied 60" and looking at the 66" & 74" units. I move snow commercially but am not a huge operation. The 60" has worked fine but it would be nice to have one a bit wider. Being the 60" is depreciated out...

Reference this thread for history. http://www.tractorbynet.com/forums/ls-tractor-owning-operating/346659-more-emission-bs.html?highlight=regen Yesterday loading dirt is started going into regen ever hour or so. Today the **** thing is back in limp mode!!! I'm guessing another 600 mile...

Any input on these?? Looks like they might move a bit more snow @ 1,100 RPM VS a 540 RPM pto powered blower..... https://www.youtube.com/watch?v=Q87zCk-7pZQ

Where can i get one of these???? https://www.facebook.com/jeanfrancois.bedard.52/videos/1644587319127835/

So about 10p-12 times since the middle of last winter my tractor has gone into limp mode. I have put on over 100 hours since this started. It has progressively gotten worse and does it about 1/2 hour after EVERY regen cycle now. Goes into 1800RPM limp for nearly an hour AFTER 30 minutes AFTER...

Hilco Industrial ? Asset Acquisition and Disposition

This winter when it was -20* it did this a few times and has been fine since. Yesterday i unloaded a semi load of 1,500# big square bales of hay. It went into regen and finished as normal. Today i was working around the place loading trash and getting ready for winter. (60* temp) All of...

I have committed to buying a front hitch from a guy for a "good price". It is off of a New Holland and he got it when he bought a sweeper but has a quick hitch on his XR3037 already and don't need this one. The only thing that MAY need to be modified as the back mount which he says looks a...

1 year old and 189 hours. VERY pleased with the tractor. Performance is great, sips fuel, has plenty of power and starts easily at below ) temps!! I will NEVER go back to an open station tractor again! The cab was a blessing this winter blowing snow and has been AWESOME this summer with...

When i push my loader lever forward to float it of course locks as it should and easily. When i go to take it off float i have to yank it VERY hard and feel i may break something. Anyone know how to adjust the detent? Before anyone questions what i am saying, i grew up on a dairy farm and...

Easy choice for me. This is the 1st summer in 5 years that my lungs don't hurt and i am not coughing up crap for months on end. LOVE the cab and A/C!!!!! (Had to link from photobucket as it seems photo uploads here are broken AGAIN)

They put ONE HECK OF A cooling system in these tractors!!! Just shy of 100* here today in Northwest Montana and i mowed all afternoon with the A/C on full blast. Even in Regen the gauge would hardly move! Started getting a tad bit warm and found the screen nearly plugged but it NEVER...

Got a new Woods Brushbull 72X last year. Other than it denting badly in the terrain we run it has been a good machine. My guy got off the tractor 2 stretch his legs about 2 hours after lunch and found one of the oilite bushings in the rear axle missing. Either it was missing from the...

OK, This winter at about 70 hours and at 20 below 0 with a lot of starting and shutting down i had a regen episode where the "!" symbol and both regen symbols came on and power was cut to 1800 RPMS. It took over an hour for it to get power back and then everything was normal. Thought it might...

Seems as if my loader is a bit weak. Picked up a ton of fertilizer for $1.45 a 35# bag last week and had to unload 20 bags before the forks would get it off the truck. Forks weigh around #300 and they where stuck all the way in the pallet. I would have hoped the loader would pick up a...

Guess i should have put this post here. http://www.tractorbynet.com/forums/attachments/329114-snow-blower-hydraulic-chute-rotation.html

The last couple regens, Both orange regen lights come on, RPM's are limited to around 1,600 and the exclamation point light in the lower left flashes. Takes about 45 minutes till the power comes back just sitting there running at 1,600. Anyone else see this happening? Was working normal...

Saw this one on Craigslist tonight. Anyone ever added an orbit motor on the cut off crank shaft? If so how and what size motor?

Bought a set in 2012 from Tractiotirechains.com but it seems they are out of business. I REALLY want H-Bars but they are near impossible to find and if i do find them are $600+ dollars. Anyone have any leads? 43x16-20 rears and 25x8.50-14 fronts. LS XR3037C

Anyone know the size of the freeze plug hole so i can spec a block heater? Dealer wants $75 and i paid $25 for the one for my old New Holland. I think it is the same engine block as my old NH but i'm not sure......

Turned 67 hours tonight while tilling the garden for Garlic. Thought i would pop in for a review. Over all i am VERY pleased with the tractor. It has made me a lot of money already. Here is a breakdown of what i have done. Installed new speakers and stereo. Added tie downs to the front...

Does anyone know where this bugger is located??? Sounds like it's under the dash somewhere but it has evaded my detection so far!!!

I didn't like using the front frame to tie down my tractor on my trailer as every time i torqued the binders, the frame tweaked. Being i am commercial i can't get away with JUST tying the front down by the loader. (DOT REGS) I have to tie the front, back, loader AND implement down. Made a...

As i said in my post the day i picked the tractor up, the seat was waaay to low. I had a moment this afternoon to "raise" it up a bit! It's amazing how much difference an inch and a half makes. I was also able to move the seat back an inch. There are 2 sets of holes and the factory had the...

I am pretty disappointed in my Woods brushbull i bought last week. It has 30 acres on it and it looks as bad or worse than my Landpride RCR60 with 500+ acres on it. The property i mowed today i have mowed for the last 2 years with the Landpride. Yeah it's rocky but that's Montana. We...

Any reason i can't change the oil at 25 hours? It's starting to get dirty with 15 on it and would be nice to dump that and start over fresh again. My Grasshopper mower with a 25HP Kubota Diesel was changed at 25-50-100 and has been changed at 100 ever since with no oil consumption. Gotta...

I have had my tractor for 5 days now. While mowing i am noticing the steering has a mind of it's own. When i turn to full lock right or left it will hold but if i turn part way and look over my shoulder at the mower, i turn back around and notice the tires are starting to head toward straight...

Dealer called with my S/N yesterday and tractor is on a truck out of northern California as i type this. Will be in Spokane Wa. Monday. 3 hr drive to pick it up Tuesday. All the dealer had in stock where Hydro units so this was a special order. XR3037C Gear Tranny, Tires filled with...

I have run a cash business for 8 years but find myself forced to upgrade tractors due to health. I had what i think was Dust Pneumonia last summer after bush hogging nearly 100 acres in 3 weeks. I wore masks but they did little good so i am upgrading to a cab tractor. I'm pretty set on...

In case anyone is in the market...... MOWER, FLAIL (BUSH HOG) - GovDeals.com

I was all set to but an LS XR3037C until i found out Massey had the power shuttle. I am intrigued as i have run backhoes and loaders most of my adult life and they all have power shuttles. I really don't want a Hydro as i don't want to run around at full RPM just so the loader works faster...

OK, Before the search police stop in i did do a search and came up empty handed. Who and where are these made? American 6 Foot Rotary Mower Brush Hog 6' 3 Point Hitch Brush Cutter | eBay

Looking at upgrading from my 1725 NH to an LS in one of the above flavors. Really wanting into a cab tractor. I was able to demo a 4046 today but it was a Hydro. I want a shuttle. Better fuel economy and i can idle around if need be. So if anyone has one of the new XR's lets hear about it!

Need a 60" blower for my 1725 New Holland tractor. I have found these 2 below: 2010 Woods S60 used 2X looks brand new $2000 2011 Buhler/ Allied/ Farm King Y600 Brand New $1950 ($150 extra to assemble.) The Woods has A 23"- 3 blade fan weighs 447# Not sure on the gearbox open or closed and...

Looking at a 1997 1725 Boomer for my business. It is a 4x4 with 7308 loader and 1500 hours on it. Only thing ever done was a clutch at 900 hrs. Comes with a tiller, bush hog and 16' trailer for $10,000. Anything i should look out for?? Also does this have independent PTO or a 2 stage...

I need a compact tractor in the 18-28 HP size but want a live pto so i can bush hog easier. I have a budget of under $12,000. From what i am finding Yanmars, Mahindras and Kioti's do not have live PTO's. The only Kubota's i can find with live pto's are out of my price range. Any help????