Search results

Is the quick tach loader hook ups on the new 424 the same system as skid steers use or is it proprietary? Thanks Chris

Is the quick tach loader hook ups on the new 424 the same system as skid steers use or is it proprietary? Thanks Chris

So I have narrowed the field down to two tractors. The Yanmar 424XH TLB or the Branson 2400H TLB both with 3pt and r4's. I will outfit either with a box scraper and a grapple/rake bucket. The Yanmar is $6k more than the Branson (John Deere is $4k more so, no go). So any thoughts? Thanks Chris

How much weight is too much to mow a lawn? The ground is dry and firm but it is on a slight grade which I can mow straight up and down. Best Chris

I am considering this tractor as the salesperson said they would put one on a trailer and bring it up to me (1.5 hours North of them) without me even asking him. However I wanted to get your input and feedback as to the build quality, dependability, access to parts and service etc. and if...

Has anyone switched from the factor paper air filter to an after market washable filter? If you have what were the results? Thanks Chris

Does anyone know when the Branson 2800H will be available? Best Chris

So which makes and models would you consider looking at to get around 13"'s of ground clearance. So far I have looked at Branson 2400H and Mahindra 28xlH which both have ground clearance coupled with a lower price tag. Best Chris

So the title asks the question what is the difference between the GC 2610TLB and the GC1720TLB?

I am looking with favor to the Branson 2400H. Which TYM is equal to or better than the Branson 2400H? I am not as concerned with the PTO horsepower as I am with the ability of the loader/backhoe and ability to control 3pt implements such as a box scraper. Ground clearance and the ability to...

The Branson 2400H can be outfitted with either the KMW (K680) or the Ansung (B660) backhoe's. Which is a better match for this tractor? Thanks Chris

I have visited and driven 5 subcuts as follows in order of how far away from me the dealerships are. 20 minutes = John Deere the 1025r, 45 minutes = Kubota the BX25D, 90 minutes = Mahindra 28XL hydro, and the Branson 2400h at the same dealer, 30 minutes further came Massey Ferguson and the...

Manufacturers seem to change model numbers every couple of years. How does this affect parts availability? Thanks Chris

Has anyone mounted a portable winch on a Mahindra 28 xl hydro? I would like to have one that I can hang on the front or back as needed if it gets stuck in a "hairy" situation. When doing land cleanup on our 2.5 acre hill side property I tend to do that. Thanks Chris

I have posted this in the Mahindra forum as well so... Does anyone have an opinion (LOL) about which company will be around in say 10 years or 15 years, or 20 years...' Thanks Chris

OK so I am posting this in the Mahindra and the Branson forums with the reverse title. Does anyone have an opinion (LOL) on which is the more likely to be around in say 10 years or 15 years or 20 years ... Thanks chris

Also the serial #04317 Does anyone know about these tractors and their value? Thanks Chris

Does anyone have thoughts on; What is the plus or minus to metal versus plastic body's on tractors? Best Chris

In looking at Sub compact tractors it seems that the tractors are all essentially equal, plus or minus a few features/dollars. Does it then come down to which dealer will provide the best support for the manufacturer or is it dependant on them selling the tractor in the first place? If so would...

OK So I am looking at a subcut and the only dealers with 1.5 hours are JD and Kubota. So between the JD 1 series and the Kubota BX series who has the better , tougher, longer lasting hydro tranny on hills and better, tougher, longer lasting hydraulic pump for heavy use? Thanks Chris

How hard is it to get parts for the Zetor Zebra?

Which engine is better for hard use in a John Deere 318 and why? Briggs & Stratton Vanguard 23 hp or Onan P218

My John Deere 318 with a Onan P218 either split the crank or threw a rod. Either way fixing a 19 year old engine with over 700 hours on it seems maybe it's time to replace it. What do you think? Thanks Chris

Does anyone have a recommendation for a repair place in Western Washington? I have a John Deere 318. Thanks Chris

Looking for a recommendation of where on the west coast (Washington state) do you go besides the dealer or the yellow pages to get a John Deere 318 repaired? Thanks Chris

I need repairs to my JD 318 that exceed my ability. So I am looking for either a good repair shop in or around western Washington or an inexpensive shipping source from western Washington to Hastings MN. Thanks Chris

I have a JD 318 and it has the hydraulic tiller setup. I want to keep this as it works really good and get a second hitch weld a plate on top of it that it is 20" wide with flanges on the sides to take 3 point pints and a hinged type of rod to attach to the top link post . Does anyone see...

I have a 1990 318. It has 4 hydarulic ports up front. Two of which are on the same circuit as the rock shaft cylinder. I need to be able to seperate the control of these cylinders. As the "hydraulic flow diverter kit" from JD is NLA does anyone have a "how to do it" solution or even a...

I have a 1990 model 318. Today the right rear hub nut came loose and the washer is lost. The axle key was all the way inside and so I believe was not engaging the washer at all. I checked on the JD Parts web site and for the rear axle hub key ( if I looked at the right part) it shows M85332. But...

I have a 318 with the rear double sheave pulley for the rear electric PTO unit. There is currently about .3" between the rear of the bolt which holds the pulley assembly on and the cross arm cylinder between the frame which raises and lowers the MMM and or the rear attachment. So is there...

Does anyone know what the gearing would be to change the current 2000rpm on the rear PTO to 540rpm? Chris

I am getting a 318 with a tiller and wondered if using the tiller on unbroken ground with rocks, alot of them varying in size from .25" up to 65lbs in it is a wise thing? Or should I first run a plow or box scrapper or a landscape rake? Suggestions and or opinions appreciated, Chris

Enlightenment please I will soon have a 318 with 4 hydraulic ports up front currently attached to the front blade. One set is used for the angling and the MMM up/down action so my questions are; Does this work by providing a bypass in the hydraulics or ? How hard is it to install and what...

First off wanted to thank everyone for their great help and wonderful advise. Friday my new to me 1992 JD 318 will be coming home. It has a triple bagger system a 54" hydraulic front blade with both up/down and right/left angle adjustments, and a hydraulic tiller, OH and wheel weights and bar...

First wanted to thank everyone for their help. Friday my new to me 1992 JD 318 will be coming home. It has a triple bagger system a 54" hydraulic front blade with both up/down and right/left angle adjustments, and a hydraulic tiller, OH and wheel weights and bar tires on the back. It has 452...

Will the later models of 318's (1992) with the four hydraulic ports up front run a FEL or do you need to stick with something like a Johnny Bucket? Chris

Is the Honda 5518 aws 4X4 a good match for the following needs. Property size 1.25 acres Mow between .5-.7 acres Till garden 40X100 General chores like basic landscaping moving heavy objects towing a garden cart full of plants flowers etc. I see one in Mi but that is clear across the...

OK so I saw somewhere a basic guide for figuring out tilt angle of the ground. I was wondering if there is a way besides ending up on your head of figuring out what angle you should not exceed? Also what uphill slope can most 2 wheel drive garden tractors successfully navigate while mowing or...

Can anyone give me an idea of what it would cost to have a 318 taken apart and painted completely? Say a general minimum and maximum type of number? I understand that there will be differences based on location degree of mechanical issues etc but primarily I am looking at a while new paint job...

OK so I have looked into several tractors and for my current needs as well as those in the future have found that the older JD 318 seems like a pretty well rounded machine. I prefer new to used for reasons like warranty, service, parts etc so there seems to be a consensous that the lowest...

Wondered which of todays models is the equivalent of the 318? Also wondered how long that model is expected to live? Any input appreciated. Many thanks,

Found a 318 all original from 1990 showing 450 hours, a 46" deck, hydraulic blade (tractor has 4 ports on the front), a tiller and wheel weights with bar tires on the rear and turf tires on the front. The tires don't look bad but the tractor and everything has been left outside and is rough, as...

I am looking at a garden tractor size of unit to primarily mow and till. For the tilling what are the thoughts on self powered units versus Hydraulic versus mechanical? Basically I am trying to figure out if the self powered units are heavy enough in comparison to the tractor to get the...

What say you to support the use of either a tiller or a plow, cultivator and a disk harrow. One web site that I was on said that the method of using a plow, cultivator and disk harrow is still used and even hinted at being preferred by some to using a tiller. One reason was the cost of the...

Can anyone enlighten me as to the G series from Kubota? I mean are they worth the dollars or is another unit so close that it is a better buy? If you do own a G series can you chip in your two cents worth on the machines pro's and con's from your perspective? Also does Kubota manufacture it's...

If you have any input concerning Ingersoll LG tractors I would appreciate your sharing. Here is a link to their web site; http://www.ingersoll-inc.com/ Thanks Chris

other-ML-550041-ML- Moved to Other tractors forum. Please keep the buying/pricing for general questions or comparing multiple brands.

I have noticed that some tractors (Staying within the LG tractor size) such as the ingersol 4000 series have larger diameter rear wheels (taller) and other tractors have much smaller diameter rear wheels. What is or are the reasons you would want wheels of such differing diameters on a LG...

Looking for information about the John Deere 318 the serial numbers of the unit I am questioning are Serial Number on the chassis is M00318x288260 and the 140/318 48" mowing deck Serial Number is M0048DC136010 It has been fitted with a newer rebuilt 20HP Onan. Any help would be appreciated, Chris

Found a brand new 2004 CC2521 for $3095 with a 44" deck and wondered if it is a deal worth pursuing, or perhaps... Chris

Hi there, Wanted to tap the collective wisdom of the group to try and figure out which is the most liked garden tractor and easiest to deal with company for the following price ranges; less than $2500 $2500-$3500 Chris PS I found a CC2521 for $3095 with a 44" deck and wondered if it is a...

I realize that there are many similarities to Simplicity here but wondered what about the MF's as garden tractors or is there a better option? Thanks Chris

I don't understand. Why does the CC 3000's steering not have any mechanical link ? If it breaks or won't start for whatever reason then it sits where it is until an on site service call is placed, $$$. Chris

OK so I open the table as much as possible to ask for recommendations for a lawn and garden tractor to do the following. Mow .5-.7 acre finished lawn Till rake harrow etc the garden 40 X 100 General yard cleanup on 1.25 acre (tow garden cart with plants, tools etc) Further I need to keep the...

Looking for a lawn and garden tractor and as my uncle used to sell MF's back in England and the reputation they carried wanted to look at that brand. But I cannot find a local dealer nor will the MF customer service people respond as to where I can find one who carries these units. The only...

Trying to figure out if the 2.25 gallon fuel tank the tractor comes with is big enough for a days work or how many times do you refil for mowing and tilling and general work in one day on 1 acre? Thanks,

Looking to buy a GT for mostly mowing (.5 to .7 acre) and tilling etc. the garden (approx. 40 X 100), and basic yard shores on our 1.25 acres. I like, after dealer thoughts added the CC 2523 and the JD GX345 but wondered if there was anything else that falls in the used category I should...