Search results

Looking for a used 50-60" snowblower or similar for Cat 1- 3pt hitch. 540pto preferred want rotating blower spout need not be power turn. Nick 715-307-7940 Western WI

Anyone have an owners manual or repair manuals they'd like to sell for a Kubota B7500HST with LA302 loader and 60" MM belly mower? Thanks Nick

Kubota B7500 HST with 60\" finish belly mower Hi Guys, I'm new to Kubotas and was wondering how people like the 60" mid pto belly mowers as far as mowing quality, ease of removal etc. I have the chance to buy a B7500 with a LA272 loader, 60" belly mower, turf tires, 4x4, 98 hours, a 2001...

Happy Holidays to all of the TBNers from Nick at Nick's Nursery and Farm Service in frozen WI. (-14 F this morning) This is still the place I go for my Yannie info when I need help or am just cruisin' the web. Thanks for all of the great info over the years! Take Care, stay safe, Happy 2005...

Hi everyone, Thanks for all of your responses to my Zetor manuals for sale. I have one brand new, factory parts manual in a large 3 ring binder. It covers models 5211,6211,7211,7711 and 5245,6245,7245,7745. I'd sell it for $20 + shipping, very complete parts drawings. Feel free to email me at...

HI Guys, Unfortunately, a personal situation has forced me to close my Zetor dealership. I'm still going to keep selling the used tractors and PPC's I have a complete set of Zetor parts manuals that covers 3321/3341 through 7321/7341, 3320/3340 through 7320/7340, 5211/5245 through...

Hi all, Down to 38 degrees here last night, going to be time to fire up the waste oil furnace again soon in the shop. Still didn't get my ceiling in this summer. Did get a different burner style started. Better hurry up and get it done! Going for a forced air burn this time rather than just...

Would any owners of Jinma or other brands of chinese backhoes care to comment on construction quality, usefullness, potential problems. I'm looking at trying one and as wondering also if they seem to operate better with PTO pump and reservoir or running them off the tractor hydraulics...

Hi guys, I saw these little used 4x4 trucks at hoyetractor.com and was wondering if anyone owns one and could tell me about them. Would like to hear good and bad! Check out the pic Thanks Nick

Hi Guys, I do a lot of neighborhood tilling around here. Was watching neighbor farmer one day with his deep ripper in the field. It's for ripping up "plow pan" or "hard pan". Thats the layer that is plowed down to every year but not broken up or disturbed. The deep ripper is a very narrow...

Hi guys, Anyone have an air cutoff valve that goes on the intake manifold of an Iseki engine? I need one and was hoping to find a salvage part. Shoot me an email if you can help! Thanks Nick

Hi again guys, I'm looking for someone that has an iseki tractor engine for parting out. I need one of the air intake cutoff flapper valves that sits above the air intake manifold to kill the engine. Shoot me an email if you can help out. Nick

We\'d better change our name to Zetor/Century/Brans Hi guys, Guess we'd better change the name of this group listing to Zetor/Century/Branson. Just got done talking to my area manager. Got the new literature for the Zetor by Century tractors. The new tractors will have black grilles, and a...

Hi Guys, Hi from WI again. Starting to get cold here in the shop again and deciding to build a "bigger" waste oil furnace. My Mother Earth News model from last year's posts works fine but now that my shop is bigger I need to put out more heat than this rig is designed for. I was wondering if...

I have a YM2010 with a 3T82B engine that has a smashed engine oil pan. Does anyone have a bad engine that you parted out? Please email with any availability and price info. Thanks Nick

Hi guys, I need an engine oil pan for a Yanmar YM2010 with a 3T82B engine. Mine got smashed. Anyone out there have one available? Thanks Nick

Here\'s pics of my baler belt cutter guard Here's three different pictures of the front guard on my 5' KK brush hog. I just used some angle iron, baler belting, plumber's strap metal, and some self tapping sheet metal screws. Has been mowing all summer and working well. Contains the dust in...

Hey Chipper glad to see your getting your Centurys out and about. I too will have a booth at the Pierce County Fair in Ellsworth, WI August 7-10. If any of you are in the area stop by and chat Century with me. Be glad to show you the features of Century tractors and C50 loaders. I will have...

Hi again, Just a quick note to all prospective buyers. Make sure when you are shopping to ask what features are included in the price you are getting. Many features are standard on some tractors and expensive markup options on others. Check things like how many PTO speeds, draft control on...

Hey guys, Finally got my Centurys in! 2035,3035,3040. Check out my website for more details. After all of our discussions I have just been chomping at the bit to get them in and now they are ready to go! I ordered two with the C50 loader. Everything that was said about that loader is true...

Has anyone had to shim the front 4x4 axle pivot point on a YM2610D?? My front axle moves forward and backward on its pivot about 1/8 of an inch. Is there Yanmar shims made for that to make up for the wear or what have other guys done? Thanks for the help in advance! Nick

Has anyone had to shim the front 4x4 axle pivot point on a YM2610D?? My front axle moves forward and backward on its pivot about 1/8 of an inch. Is there Yanmar shims made for that to make up for the wear or what have other guys done? Thanks for the help in advance! Nick

Anyone happen to have a set of replacement brakes for a TL1900F. Mine are to the point where it stops like an old Ford 8N, when it's good and ready. Anyone know of anyone that relines those brake discs or knows if they are a wet or dry brake system? Thanks guys, Nick

Has anyone tried the Century/Branson backhoe? I am a new Century dealer and have seen/driven the tractors and loaders. That cemented which brand I wanted to sell! I have not seen the backhoes though, and would like feedback on them before I start ordering them. Thanks again for the input. Nick

century-ML-278037-ML-

Hi Guys, What do you think of the idea of asking Muhammad to create a topic area posting for Century/Branson. They certainly seem to be catching on as a discussion topic. Maybe its time to move them from "other" into their own topic! Please respond with your comments/interest! Nick

century-ML-272104-ML-

I want to build a power broom for my tractor. Does anyone know where I can get the brush? The rest I can build! Has anyone else built a broom for their tractor? I want to sweep light snow with it and flick the rocks back onto my driveway that I pushed into the lawn with my pickup and...

Has anyone tried using a power rotary broom on their tractor? I want to build or buy one for my compact tractor. Don't really care if it goes on front or back, I can figure out how to make it work. I only need the broom. I want it to sweep rocks from my lawn back onto my driveway that were...

I need to change the fuel filter on my Iseki TL2300. Does anyone have a WIX or Napa interchange number for that filter? Appreciate any and all help. I get the blank stare when I go to the local auto parts stores around here. The the statement "that doesn't show up on my computer". Thanks...

Ealisimi are you still out there? Just looking for some thoughts. I built the mother stove and does it get hot!! I have noticed that if I give it a fairly steady stream of oil it gets to a point where it makes a fluttering sound and the flames try coming out around my door. I did weld on...

Does anyone happen to have a Mitsubishi MT20 4x4 3cyl diesel that they are parting out? I don't have the engine number handy right now but I will get it. I know I need the solenoid. The starter gear and bendix works but the solenoid doesn't seem to have the ooompf to kick out and get a clean...

Hi guys, I was wondering if anyone had a really good resource for NGK glow plugs. I have 4 that need replacing and the parts stores around here give me the "you want what?" look when I go in there looking for tractor parts. I need 4 NGK Y142T glow plugs on one of the hex sides it also says...

I was just wondering, maybe even polling what weight oil you guys are running in your diesels? I was talking to my trusted mechanic last night and he said unless the tractor is being subjected to severe tillage or pulling loads he would run straight 10wt in the winter and straight 30wt in the...

Thanks for the Iseki forum. They make a great little tractor and deserve the space on the board!! Thanks Again Nick

Hello again, I was wondering if any of you are burning waste oil in your shops/tractor hiding places? I am considering heating my shop with a waste oil furnace and have seen many plans to build heaters. I am considering building since the cheapest store-bought unit I can find is around $2000...

Does anyone have experience with the Jinma cab. I was on the Deljin website and saw a picture of them. Was wondering if anyone has purchased that option and what features they had, how well they fit, etc. Nick

Can any Mitsubishi MT23 owners help me find the correct way to check trans/hyd fluid? I can't find a dipstick, oil level plug, or sight glass to check the level. The filler plug is high on the 3pt housing on the rear end and has no dipstick attached. Thanks in advance for the help Nick

Hello, With cold weather coming soon to WI I was wondering if anyone had plans or knew of plans for waste oil or used engine oil heating units for a shop?? I posted this earlier in the year but thought I would try again since we seem to have grown significantly in membership. Thanks Nick

I just got my new 6' First Choice finish mower. It was a cinch to put together and start mowing. I really like the lower 3 pt connections. Very easy to use and connect and allow the mower to tip side to side freely following the ground while staying behind the tractor. I tried it in 5-6 inch...

Hello, Could anyone help find glow plugs for an Iseki TL2100 They are 9V number JKC3E plugs. The plug threads are 10mm in dia and have a 1.25 pitch. Attached is a picture of the plug. Locally we nailed them down to a Diesel Kiki now Zexel part number but not able to get them around here...

Has anyone heard from Reggie Ferguson in Virginia lately? I heard he was creating a new website but I haven't heard or seen of it. Feel free to post or email me a link Thanks Nick

Could anyone post info on their gray market yanmar mini excavators? I am interested in doing small digging jobs and rental along with my grey market tractors and am thoroughly impressed with the digging these minis can do. Please comment on the good and bad and any resources/dealers you know...

Hi, Check out the Attachments heading on the main index for pictures of the 3 pt hitch I made that allows me to still use the 2 pt rear tiller. Works out good so far, have added sway chains on the inside of the arms connected to the big threaded link hanging in the pictures. Feel free to...

Hi guys, finally got around to taking pics of the 3 pt hitch I just finished on a TU170 Iseki. Wanted to make sure to retain the 2 pt option for the tiller because it came with a really nice 2 pt tiller, but wanted 3 pt available for all of the other toys we seem to find that we didn't know we...

Has anyone replaced a Pto seal on a TL2100. I was just wondering if that is something that I can get off and replace from the outside or do I have to split the tractor and go after it from the inside? Nick

You guys that like to spend weekends with your tractors would really appreciate the latest addition to one of my tractors. I installed a fender mounted radio that I ordered from TSC. Has a really weather tight box and a nice sounding radio. Works great on my little Iseki. Makes mowing seem...

I am looking for help finding an oil filter for a TL2100 Iseki. The factory engine oil filter number is 6999-999-001-00 Looking for wix, napa, doesn't matter really. Thanks nick

I have an engine oil filter from a TL2100 that I would like to cross to WIX, Napa, etc. Can anyone help? Iseki filter 6999 999 001 00 Thanks Nick

I am looking for plans or ideas to build a waste oil furnace to keep my tractors and shop warm. I have many gallons of used engine, trans, hyd, oil and know there are home made furnaces out there. Just looking for ideas to heat when I am in the shop, not one to leave unattended. Thanks Nick

I finally took pics of my home made chain guard, works great!! Need 50' of 3/16 chain cut into 7 link sections. I had my boys cut mine with a bolt cutter, made it fun for them. I welded them to a piece of scrap angle iron and tacked it onto the mower Check out my website for my latest load of...

I finally got my chain guard pics taken of the chain guard I welded up for my 5' KK brush cutter. Any questions feel free to email Check out my website for my new load of Iseki tractors and equipment Nick

I am searching for a good source of both new and used Iseki parts. Please contact me with any info Thanks Nick

Searching for any info on dealers with availabe parts for Iseki tractors. I have a list of parts I am looking for, please e mail any leads on parts you may have. THanks Nick

Does anyone know where I could get the u joints to rebuild driveshaft between the divorced engine and tranny setup on this little tractor? I need to replace the powershaft joints that drive the tiller and can't find them around here. I also need filters, engine, tranny/hyd, and fuel. Thanks Nick

Just got a TU180 Iseki 4x4 with a lot of slack in the shifter for 1,2,3,R Anyone worked on these before and can comment on where to start. I'm concerned that gear selections may not be fully engaging with all of the slack in the shifter. If I need parts can anyone help out? Thanks Nick

Just got my Iseki tractors in and finally got a chance to play with my new Caroni 6' RD finish mower and my 5' King Kutter brush hog mower. Both worked great! I looked back, (Thanks Bird) for some ideas to make a dangling chain guard for my KK to keep stuff from flying at me. Was about $250...

new toys-can\'t wait to use Just picked up my KK 5' brush hog and my 5' box blade. Lots of weeds to mow and dirt to move. May even go looking down the road at the neighbor's weeds. Any suggestions as far as deflectors for the brush hog. I see the front and back of the mower deck are wide...

Could anyone comment on Caroni Mowers that they have used with their Yannies? I'm particularly interested in their 6 foot rear discharge finish mowers and the flail mowers Thanks Nick

Looking for any current Caroni Mower owners to comment on the machines. Interested in both their finish mowers and their flail mowers advertised in the Agri Supply catalog. Thanks Nick

I am looking for anyone who has purchased tractors from good88.com. I would like feedback on the transaction, information, shipping etc. Thanks Nick

Help! Sold a tractor and tiller combo but have no powershaft for the tiller. Need a PTO for a Yanmar RSA 1300 tiller with a F16D tractor. please e mail me with prices and availability THANKS NICK

I need a PTO shaft for a Yanmar RSA1300 tiller on a F16D tractor. Tiller came w/o power shaft. Can anyone help? Thanks Nick

Could anyone with pics of 3pt hitches they made please post. Looking for ideas for F15 F16 Yannie 3 pt hitch conversion Nick

I need the plastic and mesh front grille assemblies for a F15D and a F16D that were smashed in transport and I need a voltage regulator for the F16D. Can anyone help me locate these parts? Thanks Nick

Hello, Does anyone have a good source of the filter numbers for 2210 BD, F15D, F16D, yanmar and a sp1740 shibaura? Looking for filter numbers for fuel, air, trans/hyd, engine oil. Napa, WIX, Fram any aftermarket brand like these. I also need tiller teeth for the tillers on grey market...

I know this has come up before but in the crossover I lost it. Could someone help me with filter info on F15D, F16D, YM 2210D? Looking for crossover part numbers for Wix, Napa or others. Need fuel, air and engine oil part numbers. Thanks for your help! I'm really glad we crossed over to TBN...

Any suppliers in the Wisconsin or Midwest area for Avenger tractors? I am a small grey market dealer looking for options in chinese tractors

could current owners of dongfeng tractors please post comments good or bad. I am looking for feedback on the tractors. Considering purchase now Thanks

Any owners of Taskmasters out there with comments - good or bad on engines , trannies, hydraulics, features etc. All info appreciated. nick

Can anyone comment on the Shibaura SL 1543 4wd Advantages/disadvantages options opinions likes/dislikes any and all info would be helpful. Nick