Search results

I finally made up my mind and ordered the two piece rims from Heywheel in KS.. I had them installed on my TC 30 last week and now have options of widening the rear end from the previous 50ish" out to 72" although I will probably keep it at the 64-66 " width.. I do feel more comfortable on my...

I just read a post about 10 hour check up/ maint.. I have a -TC 30 with 15 hours other than check fluids should I change any thing?? thanks

I have used my neighbors bush hog 42".. I would like to get something like it, but would like a 54-60" cut has any one ever seen one that big?? Thanks

I bought a TC 30 and it came with one piece rear rims. . I have loaded the tires and turned the rims around and have 60" across the rear.I still have an uneasy feeling when not on even ground. Does any one know where I can order 2 piece rims?? Would this widen much more and be worth the...

I have been trying to find a way to widen my rear end.. New Holland TC30 came with 1 piece rims even with the wheels turned around still feel a bit tippy when I get sidways or when my bucket is full,I live in southern Ohio and have a lot of hillside to work on.. I have been considering ordering...

I have a KK 5ft bush hog and hooked up for the first time yesterday. And when I tried to attach to the tractor the shaft about 4 " too short?? I thougt the thing woud pull apart to fit but as hard as I could pull would not seporate?? The entire shaft is encased in hard plastic cover so I can't...

I just bought a NH TC30 for my 33 acre farm.Mostly hillside in southern OH.. Clean stalls repair fences,occ new fence, bush hog a bout 7 acres of pasture.. I wish I would have known about Power trac before buying my NH.. If I can sell and not lose my A--, What size Power trac would I need?? Will...

Now that I'm Clear on Classes, How about catagory?? Catagory I 3 Point hitch?? What are we talking about??? Thanks again Guess I should have taken a class in tractors ( ie Tractors 101)

Could Somebody educate me on these?? I bought a TC 30 and Know it is Compact tractor, but don't know Class 1,2,3?? What is the break point fom Compact to Utility?? I was told when looking for a tractor for bushhogging with 60", stall cleaning and occ other task on my 33 acre farm/Hills..That...

I plan to Bush hog with my NH TC30 and 5 ft KK rotary cutter.. I have read a couple of post that refer to "slip clutch PTO shaft"".. Could some enlighten me.. Thanks.. Both tractor and cutter new and I don't want to break any thing......

Does any one know of a web site, like price line .com, or ditech morgage, For tractors or attachments .. Iwant a xxx and all dealers see and compete for your business.. Instead of going on line and emailing them individually...Nice Idea HuH???

Thanks for the replys.. But still haven't found a source for either two piece or poweradjust rims to widen My rear end.. Thought I would use as is but with the loader on and hillside I had it on 2 wheels and my old heart about jumped out of my chest...pucker factor 7 on a 10scale.......The...

My friend wants to buy new or used(in good Condistion.. Any recommendations...

15\' bat winged bush hog I am posting for a friend looking for a 15 ft bat winged heavy duty, airplane tires, stump jumping Woods, or Bush Hog brand bush hog.. They have a 20 ft unit by caldwell they want to sell or trade for the above unit.. New or used in good codition.. Thanks in advance

15\' bat wing bush hog I am posting for my Friend.. Looking for 15' bat winged Heavy Duty bush hog with "airplane tires", Stump jumper""... Bush hog or Woods brand... New?? Used in good condition... They have a 20 ft Caldwell brand, That needs work They will sell at a reasonable price or...

I don't mean to beat a dead horse BUT: still looking at options for widening my rear wheels.. Has any one used or have any experience with axle extenders?? Pro or Con?? Any risk to tractor damage??thanks

I have called 3 dealers and am told that the TC30 does not have a two piece wheel offered. No one can tell ne if the bolt pattern on the TC 30 is same or differnt than the TC 29 or Tc 33 that does offer two piece wheel.. Iam trying to get the rear wheels wider before I go up on my slanted...

Just bought a NH TC30. The dealer says he cannot get split rims that allow for the widening of the rear tires.. I have 1 piece rims...11.2-24 ag tires.. NH dealer says they don't have axle extenders for this model.. Any suggestions?? I live southern Oh my farm hilly and want the security of...

I live in southern OH and will be bush hogging on some hillside and would like to get my rear tires as wide as possible.. Any one recommend a aftermarket wheel that will spin Out?? thanks

I just returned form Tarheels Tractors In Lenior N.C. 680 mile round trip and couldn't be happier.. Brad must have taken 10 call from me in trying to make up my mind and was alwys available and never seemed rushed for me to make my decision.. Kim was very pleasent and took care of all the finace...

I didn\'t see the big savings???? I have wantched e-bay, visited farm-pro, jinma web sites looking for a new 4wd 30ish hp tractor with loader assembled and ready to roll.. seems 25hp ran around $9,300-9,500, the 30hp $11,500-$13,000.. no special finacing.for either size. Just bought a NH TC30...

Will be trading my Iseki TL2300 for a NH TC30 tomorrow of course I will be taking a loss, but can't get any body in the local area to "TAKE A LOOK",, I know it is hay season and this is a busy time.. Message to potenial Grey owners, when you get one be sure you have local support.. I went to...

I am am rapidly deciding on going to N.C. For the above tractor at the best price I could find. @. Tarheel Tractors .. . Ican't wait?? Uses clean stalls , pull 5 ft bush hog appx 33 acrs of land, actually only about 10-12 that are flat enough to use tractor, Do some major fence repairs with...

I am trying to decide between NH TC30, vs Kioti 30 ?? both with off brand loaders both with ag tires.. Priced with in 2-3 hundred of each other.. Any comments appreciated..

I am interested in a 25-30 hp tractor with a loader.. I can do some minimal maint and wondered which of the above would give me the best service for the Money spent.. My local farm supply guy said he prefers NOT to work on chine tractors , esp shinnue (? sp). Thanks in advance..

I live in southern Ohio and havig trouble getting my Iseki TL2300 PTO to work.. My local guy can't figure it out (no Exp. with Iseki) >> Does anyone know of a shop that works on Iseki"s in the tri state area .. Thanks In advance

I am giving up with my local mechanic.. Anybody know of a dealer or repair shop in the Southern Oh, Northern KY area that I can Take my TL2300 to Re: PTO Not Working????? Thanks in Advance...

I'm thinking about a JD 870 with a loader 225 hours The dealer asking $ 10.6k does this sound like a good deal??? This will be definate upgrade from my current grey 27 hp tractor.

I have reqested # times some advise on Pto problem.. It worked 1 year ago ( says the previous owner) I've no reason to disbelieve him and now that I want to use it I can't get it to come on?? The switch has off turn to R and and gear light comes on on the dash, Put it in one of the 4 speeds and...

TL2300F PTO Switch on Little lite comes on in dash, Lever to pto speed, clutch out nothing happens ??? Any suggestions.. ???

Somebody out there must have a tl2300f that can help me with the PTO?? How do you get it to work???Thanks

Pto won\'t work??? I bought a tl2300 F with a tiller.. sold the tiller to my neighbor. Now am trying to sell the tractor and the PTO won't COME ON.. I have never used the pto and don't know how to get it to work?? Any suggestion word be appreciated.. tha ks

My head is swimming!! The prices for 30-35 hp with a non chinese loader seem to all be over 10 k assembled.. I was hoping for the BIG saving and hoped to find it for under 10K.. Granted the big 3 will run in the upper teens but we are talking about a ??DISCONT tractor.. I have 35 acre hill...

I may buy my neighbors case 885 but will need a loader any ideas where?/ How much it will cost?? Thanks David B Ohio

Any Long tractor dealers with in 500 miles of southern Ohio??

I saw a long at a local auction last weekend and can't say I ever heard of them.. Ran across a nice loking 4x4 360 and seems priced right but need more info.. Where are they made? Are they still in business?/ Parts issues?? thanks for any input.. David B

I have a choice of the 2 tractors both new. 1 is loacal with repairs available the other another and maybe local support.. both with FEL Farmpro with KOTKER the Jinma with china made loader same price for both.. any advise as to which to choose .. I am open for suggestions as I have never owned...

TL2300 I need replacement bulbs for the headlights .Thanks

Curently have a TL2300 with a loader but after 1 year of use have decided I need about 35 hp with a loader.. Does any one know of a Iseki or grey dealer in around southern OH ,Northern KY or western WV that would 1. Take trade of a grey??? 2. Have any Greys in that size?? thanks David B..

Any idea wher I could get a set in english.. So I can figure out gear ranges, Pto speeds ect.. thanks david b

I am probably going to buy a Branson in the next 2-3 days.. I have reviewed about 6 pages of post and am not clear on the relationship between Branson,century, zetor???Any body have a minute to explain I'd appreciate it.. Thanks

My loacl feed store occasianally will sell tractors pick-up at action.. Ceurrently have a Branson 4020 with front end loader with 67 hours asking $13900 .. The tractor appears to be in great shape.. I am looking to get a newer tractor but have never priced used Bransons.. I looked at several...

I just got this machine and need service,owners,parts. manuals. It doesn"t have any fuses in the fuse box on the left lower part of the consul?? any ideas in the size of the fuses top to bottom?? (4) of them thanks