Robert,
I'm travelling in the lowest gear, watching the entire time. We cut it completely free several times and within 10 feet it had wrapped again. I tried backing up but the conditioning rollers grab hay from the windrow behind and plug it worse! Best I can do it raise it and run it for 2 or 3 minutes, it will clear the side with the rubber still on.
We are getting a neighbour with a 13 ft disc bine to knock it all down, we'll have to do something about the haybine later.
Brought in 300+ bales last night after taking a bunch of the knotter apart to see why it was catching to pull the needles out of the chamber. The plunger stop wouldn't disengage.
Reset the knotter and the needles and it all seemed to work.
Another 300 bales tonight for fun, I hope we get the mower straightened out!
BTW, How do you know when you're going to fast for the baler? The windrows in lowest gear are filling the full width of the pickup and lifting those tines that guide it into the forks until they hit the top of the chamber there.