I Build "UGLY"

   / I Build "UGLY" #1  

crash325

Elite Member
Joined
Feb 9, 2011
Messages
3,374
Location
Tucson AZ
Tractor
New Holland TC-45
I sure do admire all you folks the build and paint some really nice things.

Most of the time when I build something, its a needed item. Or I figure that it will need more work and I'll make it pretty later.

Also most of the time whatever I build its out of whatever scrap metal that is on hand.

More Ugly later if you can stand it.
 

Attachments

  • small drag 1.jpg
    small drag 1.jpg
    124.2 KB · Views: 404
  • carry-box-3e.jpg
    carry-box-3e.jpg
    92.3 KB · Views: 401
  • 3pt-2e.jpg
    3pt-2e.jpg
    110.1 KB · Views: 364
  • pusher 3.jpg
    pusher 3.jpg
    196.7 KB · Views: 416
  • forks 2e.jpg
    forks 2e.jpg
    158.3 KB · Views: 370
  • forks 1e.jpg
    forks 1e.jpg
    192.4 KB · Views: 439
  • roller 1300LB.jpg
    roller 1300LB.jpg
    122.1 KB · Views: 438
  • fork n bucket.jpg
    fork n bucket.jpg
    111.1 KB · Views: 361
  • post drivers.jpg
    post drivers.jpg
    132.6 KB · Views: 354
  • pickle fork 1.jpg
    pickle fork 1.jpg
    117 KB · Views: 432
  • big drag 1.jpg
    big drag 1.jpg
    112.7 KB · Views: 293
  • big drag 3.jpg
    big drag 3.jpg
    149.8 KB · Views: 409
   / I Build "UGLY" #3  
nothing is ugly when its useful! :thumbsup: looking good!

I am intrigued by your extra long tooth for your BH bucket. can you tell me a bit more about it and what do you use it for?
 
   / I Build "UGLY"
  • Thread Starter
#4  
nothing is ugly when its useful! :thumbsup: looking good!

I am intrigued by your extra long tooth for your BH bucket. can you tell me a bit more about it and what do you use it for?

Hi
That is what I call a pickle fork digger. It's used for trenching out for water pipes, root breaking and rock pulling. Goes on with 2. 1/2" bolts in 2 or 3 minutes.

Mine is made of 3/16"X3" "C" channel, reinforced with 1/2" steel, old spring and 2 R/R spikes at the bottom. It works fine as is, but plan on a sharp edge on 1 side and an angled plate neat the top to move dirt off to 1 side. Have also cut a shovel down to 3" for cleaning out trench. It has worked well for me.
 

Attachments

  • keyhole slots.jpg
    keyhole slots.jpg
    92.1 KB · Views: 1,714
   / I Build "UGLY" #5  
The ugly ones want to dance too. :thumbsup:
 
   / I Build "UGLY" #6  
When you hook it up to your tractor and start using it and it works just the way you wanted it to, it automatically becomes beautiful! Nice work!
 
   / I Build "UGLY" #8  
Ugly is fine, but remember if you decide to build a dump trailer, I already have the "Ugly dump trailer" name copyrighted...



David from jax
 
   / I Build "UGLY" #9  
Crash, you have 2 choices the way I see it, Some paint that matches your tractor, or just put a grocery bag over it:D
If it was "too purdy", you may not enjoy using it as much!

If the stuff works, I say roll with it.
 
   / I Build "UGLY" #10  
Something ( only thing ) I learned in architecture school ( did not graduate in that field ) : Form follows function . Translation : If it does what it supposed to, it looks like its supposed to . If all else fails, apply the bar rule, drink 'till she' s cute !!
 

Tractor & Equipment Auctions

WANLI S 3010147/145K18 RIMS & TIRES (A34011)
WANLI S...
2007 Ford LCF Flatbed Truck, (A33078)
2007 Ford LCF...
2011 John Deere 524K Articulated Wheel Loader (A32932)
2011 John Deere...
Ford F250 Engine (A33041)
Ford F250 Engine...
Belarus 802 Belarus Tractor (A33041)
Belarus 802...
2018 Freightliner M2 106 Digger Derrick DC47TR Truck (A32932)
2018 Freightliner...
 
Top