How do I bleed the air from hydraulic system after replacing a couple lift cylinder lines and cartridge filter?

Anyone know what the compression should be on jinma/farm pro 2430 tractor? Can't seem to find any good data on it online.

I have a 02 Farm pro 2430 that has bad fuel smell from exhaust ( burns eyes also ). I'm no Diesel mechanic, and live in more of a city area. So not a lot of mechanics that work on tractors...

When I bought my Farm Pro 2430, all of the 3ph components were missing. Basically, I need everything shown in the attached picture AND a drawbar. I'm going to make some assumptions in my...

I bought a 2004 FarmPro 2430 with FEL and a backhoe, the FEL works as it should, the backhoe needs some love. I'm having no luck finding a readable diagram of the various control levers in the...

First time post but long time forum reader. Farm Pro 2430. Two hydraulic pumps. FEL and three pt. stop working after about 1 hr.in 90 degree heat when using brushhog. Power steering (on the...

I have a 2003 Farm Pro 2430, it's ideal for what I use it for. I had to remove the fiber dash to clean fuel tank out and notice some wires hanging loose. The tach, fuel, oil pressure, and volt...

I have a farm pro 2430 with 170hrs. It had been sitting for 10 years without operating. I have the tractor running well but have one remaining issue and would like a little help getting started...

HELP!! I have split my Farm Pro 2430 to replace the clutch. I installed both clutch disks and put everything back together. PTO engages just fine but the drive clutch does nothing. It will grind...

Hello, I have a Farm Pro 2430 that does not move regardless of what gear you have it in. High, low, 2 or 4 WD, it doesn't move. I lifted the front end off of the ground with the bucket and tried...

Hey all, Ive been lurking here for a while gathering information and reading posts to help decide a tractor for our 5 acre homestead. Finally made a purchase of a used 2430 with loader and...

Hey guys I have a 2006 Farm Pro 2430 with the TY395i engine. It overheats when I use the bush hog or finish mower in heavy grass. 1. I removed the thermostat first. 2. Replaced the radiator cap...

I may go look at a 2430 Farm Pro, Koyker loader with a box blade and brush hog.. I know these are Jimna tractors and are a cheaper alternative to the big names, fit & finish is questionable also...

:confused: having issues with steering. Changed fluids in hydraulics two months ago and since can't steer properly. Steering is loose and have to move steering wheel a few rotations a lot of the...

Yesterday I was plowing snow with my 04 Farmpro 2430 (It's a 30 horse Jinma, I think). The tractor has about 50 hours on it and I regularly maintain it. It has a Koyker front end loader and I use...

Just wondering if anyone has converted the push/pull type switches to the rocker-type panel switch ? David

OK, Just getting ready to do much needed maintenance I have drained & changed Gearbox & ready to change engine oil & hydraulic oil I found drain for oil & 4x4 axle, but I don't have location...

I have a 2430 Farm Pro 3 cyl. tractor. I had a tractor shop disassemble and clean the fuel injectors to make sure they were in good condition. The only problem is the shop didn't know what to set...

Hello to all, I have been reading this forum for a couple years, and now I finally have a question. Can anyone tell me where I can get a starter switch for my farmpro 2430 2005/2006 vintage tractor?

Many of the things that came with the tractor in boxes were not passed on to me yet, and I have lost faith in the seller. I am poking around for some of the components that may be nice/handy. I...

Last weekend, I did a bunch of work on the tractor, and I took pics. I made a slide show, and most of the pics have a description. Both ball joints have a broken piece in it I will call a "dish."...

need operating manual and maintenance manual for farm pro 2430

Hello everyone, I've been eyeballing 4wd tractors for a while now and saw a FarmPro 2430 for sale locally. It is advertised as super clean with ... KOYKER 160 FRONT LOADER 6' SCORPION...

My father, who had alzheimers has disconnected the guages on his tractor and I need a wiring diagram to re connect them properly, so the tractor will operate. Any help will be appreciated. Brian

Hello All, I have watched the forum for two years now and have added 185 hours to my FP 2430 in that time. Aside from the standard complaints, the tractor has served our 128 acre farm well. The...

Hello, I'm considering buying a FarmPro 2430 with a 6' brushhog, a 6' finish mower, a 6' grading blade, a posthole digger, and a lifting boom for $15,000. The company is called Triple T Sales in...

has any one bought a tractor like this on the net un seen? i have did a lot of looking and think this might be the tractor for me? i am considering a farm pro 2430 4x4 with loader, 6 brush hog ,6...

hello i am thinking of buying a farm pro 2430 with a loader. has any one had or heard of any good or positive things about this machine? any info would be helpful. thanks

Hello everyone! This my first post. I am purchasing a Farm Pro 2430 tractor. All of the specs. you see on this tractor say that the engine HP is 30. However I have been told by several different...

Need help finding 180 /185 thermostat for my Farm Pro 2430. Thanks

Hi, My FramPro smokes quite a bit when I first start it up. After it warms up a bit (never really warms up with the stock 57deg C thermostat) the smoke subsides somewhat. I have to get it out of...

Bought a farm pro of of Homier, Bad mistake but got to deal with it now. After 3 months vavle stuck in head, they said it just needed polished. I disputed that but they so called fixed it under...

Really excited, drove it with temp outside at 8 degrees,little slow starting, glad I installed heater. Filled fuel up, is leaking out top were fuel gage goes in, so far only problem,changed oil...

Recently my neighbor and I each purchased a Farm Pro 2430 with the Chinese loader. The loader on his tractor lasted about 4 hours before the eight attachment bolts at the back end of the loader...

I'm about to purchase a 2430. seems like a really good deal compared to the other guys. Anything good or bad to say about this tractor?

New user ,great site. Just bought a 2430 . Amp meter regersters 0. Batterys were half full. Then checked alternator,idle speed12.6volts,2000rpm 13.0 volts.It says its a14volt alternator. Is this...