This is my first post here, so hopefully it will help. I recently bent the hydraulic fluid dipstick tube on our 1994 - 3930 - 2wd. In my discussions with the repair person we use for our...

I am searching for a replacement wiring harness for a 1994 New Holland 3930. NH no longer sells them apparently. Does anyone have a source for one? If so please provide contact info. Thanks in...

I need to change the fuel filter on my 3930 but have never done it for fear that I may get air in the system and not be able to get it started back up. I have a few questions. What procedure...

I’m new to the forum and new to owning a tractor. I’ll apologize ahead of time for any lack of knowledge. Started the tractor the other day and now it takes a tremendous amount of force to turn...

Ran fine when parked about 5-6 months ago after Dad tilled his Garden. Visited property with him about 5 weeks ago (right before he passed), tried to start to no avail. Came back a week ago with...

Any recommendations to find replacement rear wheel rims for a New Holland 3930? Need a quantity of 2.

I just got the tractor in the title, and it's got a 7209 loader on it. I just replaced the 4 hoses coming off the control box as they were all leaking. I took care to change them one at a time and...

I just got the tractor in the title, and it's got a 7209 loader on it. I just replaced the 4 hoses coming off the control box as they were all leaking. I took care to change them one at a time and...

A few years back I had a Ford NH 3930 that I wanted to install a front loader, It was a Bush-Hog brand loader The loader I had come off a Ford 3910 or similar model, and the brackets would not fit...

Hello again. My question is can i convert my current style leveling box which is almost froze up and change it to a style with crank handle. The only ones i can find say they fit a 3910 and not a...

Ok Guys Gals and anyone who has information that can help. I just purchased a new to me 1997 3930 with 7310 front end loader. The loader is plumed to the rear hydro outlets. I have a problem with...

My tractor is about a 96. It has the hydo selector valve under the seat. It switches from rear lift to the front end loader. It jumps out of position for the loader. I use bungee cord to hold it...

My 1990's New Holland 3930 won't start. For background, this is a weird 3930 where a prior owner replaced the deisel engine with a gas engine. Anyway, it has a new battery and power is getting...

Well yesterday's effort with the 3930 was clipping several hundred feet of right of way and the 50' wide loop road around the house sight (something like 700' in diameter. All told about 3 hours...

My 3930 has a Quickie 310 loader hanging on the front. The source for the FEL hydraulics is a long hose from one of my rear remotes. I have the second 12 GPM hydraulic pump on the left rear of the...

Hello, How is everyone doing? It has been long since I posted here, you know, the hurricane happened and then in laws etc. We sent the New Holland 3930 to the local New Holland/Kubota dealer...

I was talking to this guy who works on and restores tractors and I mentioned to him that I have a new holland 3930. He asked me what year it was and I told him it was a 1999 model with about 800...

I was talking to this guy who works on and restores tractors and I mentioned to him that I have a new holland 3930. He asked me what year it was and I told him it was a 1999 model with about 800...

Not sure this photos will show up. They are photos of my old clutch and a new one I ordered. The new one part number is on the box. The old clutch had the inner tension springs or whatever you...

In process of changing clutch-pressure plate. Found new pressure plate and clutch on EBay. Like to ask some of you mechanics if you replace pilot bearing and throwout bearing if they are still...

The lights and hazards on my1999 New Holland 3930 ROPS are not working. Does anyone have the fuse box schematic and a lighting system wiring diagram? Of course the first and easiest step is...

I don't seem to be able to close the latch on the top link of my tractor. The sleeve turns easily on the threaded rod but I think I should be able to close the latch down against the sleeve to...

Okay all - Newbie here that has to relay instructions to another so mechanical work can be frustating. Here we go. My NH 3930 will not start. Wanted to check ignition relay first but my tool man...

Hello, I need to replace the ALTERNATOR in my New Holland 3930 tractor. I have tried two brand new 950CCA Interstate batteries and both of them have lost cells, i.e. they are losing charging...

Have about 15a of old hay field that I would like to clean up and keep mowed to about 8" probably 2-3 times a year. All open area with no fences. I am currently looking for a new rotary cutter...

Hi, I have a 1996 3930 (3 cylinder) that I've had for aroubd 4 years. I rebuilt the engine a year ago bc of excessive blow by. Last week, it died on me backing a trailer up a hill and wouldn't...

I have a 1999 NH 3930. Having a problem with my power steering operating correctly. After warming up it pushes fluid out of pressure relief valve. About 3 months ago I replaced the filter and it...

Hello everybody. Got a curve ball here. I am dealing with a New Holland manufactured by Clarke American-Lincoln model 510-010 year model 96. It has the LP setup. Does anybody Know where I can get...

I recently bought a 3930. Someone welded the telescoping lift arms in place. Is there somewhere to purchase these? Anywhere to find good used ones? Thanks, Craig

I have a 1999 new holland 3930. My tractor has a one cartridge fuel/ water separator. It does not look like the picture that came with my owners manual that shows two cartridge set up with a fuel...

I just changed the hydraulic filter on my 3930 for the first time since I bought it (used tractor) I probably lost a qt to half a gallon of fluid. I looked in the manual and can't find anywhere...

Hey guys, New to the sight and hoping for a little insight on my new to me tractor. Its a 94 Ford New Holland 3930 Highway tractor that I have bought from a local state lodge. It has been very...

I'm looking to add a 3rd function valve to my 3930 with 7310 loader for a grapple. Anyone install one. WR Long said they don't make a kit for it. Any ideas?

Our 3930 MFWD with 8x8 shuttle was acting a bit on the sticky/sloppy side. I adjusted the linkage so there wasn't as much play and lubed all of the moving linkage parts with Fluid Film. I can't...

I have not yet replaced the hydro filter yet on my 3930 (bought it used, previous owner had changed). Can someone tell me what is involved in doing this. Do you loose much fluid when changing? Is...

I have a 1995 Ford NH 3930 MFWD. The fuel shutoff solenoid is not closing when turning the ignition off. I've been having this issue for quite some time. On occasion it will shut off with the...

I had to get a new battery for my 3930. Went to hook it up and I am not 100% sure I am doing it right. One cable has the battery terminal and another smaller cable bolted to it. The other cable...

I'm looking at purchasing a 1999 new holland 3930 . Its a shuttle shift, 2wd, dual hydraulic, 55hp, 1100 hours shed kept with new tires, has front loader with hay spike(7310) what do you think is...

Does any member have experience and advice on how to remove and replace rear PTO seal and Wear Collar on 1997 New Holland 3930?

Just bought a Ford/New Holland 1996, 3930 diesel. Going through everything and find I cannot remove the outer air cleaner element. I have the wing nut removed and the retaining washer. There is a...

I had a very clean little 3930 a few years back and replaced it with a larger tractor. It has since become evident to me that there is most certainly a need for both a large and a small tractor...

Hey I was wondering if I could get some advice on buying a tractor. I have been looking at a Ford New Holland 3930 with MFWD ROPS and canopy. It is supposed to be a 1998 model and it has around...

I need some advice from the experts. I have a 99 New Holland 3930 4wd w/shuttle tranny. When tilling the garden with it, it runs too fast even in the lowest gear. I find myself wanting to ride...

Reposted - quotes in the subject line don't work, and i couldn't figure out how to edit it...

Can anyone tell me the width from outside back tires of a New Holland 3930? Thank you

need to know what the timming should be on the 3930 and how to set it back properly? took it apart and forgot to mark it...:ashamed: thanks

Can the clutch be adjusted? Most rpms can't shift gears, just like no clutch. Y'day I tried to move clutch arm with adjustment on clutch rod back (toward driver seat) but i moved it too much and...

I am looking at a John Deere 430 round baler, wondering if my New Holland 3930 tractor will pull it efficiently. The tractor is listed at 45 PTO HP, so it might be a little small for that...

What size disk will a NH 3930 handle on relatively steep rocky clay ground? Do you recommend 3 pt. or transport type? Thank you

Hey guys, Lately my loader slowed down and has made whining noises. And to be honest I have never changed a Hydraulic Oil Filter before I got my boss to do it but he wants me to do it as its...

Looking at a '96 NH 3930. 355 hr. Good rubber, no loader, 2 wd. Seller said it is cherry, and pics make it look that way. Still 15 yr old tractor??? I like old iron though, and think it may...

i have a 1997 3930-headlights quit-have power at fuse and switch seems to be working-have power on side where power comes out for rear lights-dash lights are working-wiring is in loom so cannot...

Does anyone know how to install a termostart switch on a New Holland 3930? This is the switch that preheats for cold weather starting

I bought a used NH 3930. It is missing the drawbar but it has the drawbar hangar. I purchased a tandem axel landscape trailer that I want to hook up to the tractor and use to collect limbs/trees...

looking for 3-pt hitch for 3930 or left and right leveling arms to fit 3910. Thanks

Guys i need some help. I have a 1998 3930 with only 217 hours thats in as new condition. I love the tractor but i haul it around some and work in somewhat tighter spaces (in and arounds woods...

I have a 1998 NH3930 w/192 engine with turbo and when it gets hot sometimes it must cool down somewhat before it will re-start. Also, when i turned the lights on one time while going down the...

I have a 1998 NH 3930 with 160 hours. The serial number tag under the hood shows a 3.2L turbo engine with 60 gross hp. Can anyone tell me about this engine? i would like to know the PTO hp and...

The front emblem on my NH 3930 has broken off two times. The emblem is a plastic oval that inserts into the top front hood. I guess vibration breaks the emblem studs. I know I don't need it but I...

I was clipping pasture with a six foot rotary cutter and noticed the transmission building intence heat in fact there was smoke coming from the area. The grass was tall with areas of thick Johnson...

I am looking at a 3930 among other tractors. I do not have a lot of experience picking out used tractors. The independent PTO clutch was just changed out and tractor has 1700hrs on it. Tractor...

I own a NH 3930 (tractor no. 042423B, ModelCA51WX, engine C636596 -96 or 97 model) that is equipped with an oil bath air cleaner instead of the more common dry type. I need the bottom bowl...

does anyone have any info on replacing the oil seal on the brake rod @ the rear axle housing. any info would info would be helpful. ps:i also posted this on the parts/repair board

does anyone have any info on replacing the oil seal on the brake rod @ the rear axle housing. any info would info would be helpful

I saw an ad for a 1998 Ford New Holland 3930 tractor with: MFD cab heat 7310 New Holland Loader 16.9/30 rears 11.2/24 front 1,175 hours Like New Condition I have not yet had a chance to go up and...

Can anyone tell me where I might purchase an operators manual for a New Holland 3930 4 WD? It is grey market imported from Europe. Thanks

I am looking at a 1998 NH 3930, 2wd, shuddle shift, 98 hrs., 1 or 2 hydraulic remotes can't remember for sure how many it has. I would like to know about how much I should pay for this tractor...