I have a case 446 I think my hydraulics are wearing bad I think my hydraulic pump is gone whenever I try to pull anything with it I have a loss of power but not a loss of engine is there anyone...

Case 446 not starting. The wire from the Ammeter is loose but it is so short I can't get to it from front of dash. I am having problem removing the hydrolic oil container in order to reach...

,Just purchased a 1974 case 446,,with mower and snow blade. Joined group to find more info about it,,have had a few wheel horses,,hoping the case will be as just as good as them,,,,,thks

I RECENTLY BOUGHT 8/1/2014 a 446 case. I now have my fouth one . Two and three are sold already . turned a few bucks and some attachments. i completed my cab just tonight . I have already done...

best place to buy j hose for tank to pump on case 446,also anyway to check pump before installing ,thanks lee moore

restoring my446, the things I have done are went to a 18 horse vanguard ,put on a johnny bucket,installed newag.tires and repainted the tractor. reused the 15w40 hyd oil. now I have a problem...

Hello folks, new guy here. My father gave me a case 446 which had no motor on it. I found a craftsman gt6000 with a 20 h.p. on an on it. My question is what to expect when placing this later model...

Anyone know how to adjust pto clutch on Case 446 lawn mower?

Hi! I was recently gifted a Case 446 as a housewarming present. (Bought my first home...father in law is a wonderful man.) I have two acres and a whole lot of yard work to do! Does anybody have...

I'm buying a Case 446 to use in my Maine Orchard. I would appreciate any advice fixing it up, as it's got a number of problems! One of my neighbors has a newer Ingersoll 444, which I've lusted...

Just aquired a case 446. Im needing something to pull non running cars in and out of my shop. I have always been warned never to pull cars with a hydrstatic transmission because couldnt handle...

I picked up a 446 with a blown up front clutch and the tiller for a good price, but the engine was hurting. I used it for the season, limping it along, but this spring something had to be done. I...

Traded for it a few years ago, and have ABSOLUTELY enjoyed it. Have fixed/mended/tweaked a few things here and there, and its been awesome. BUT, was tooling along yesterday, mowing grass, and she...

I have an old 446 that I am restoring. We have the Onan engine working well now, just need mufflers, so if you have a set in good condition, please give me a call. We are having trouble with the...

Is there someone who can give me a little information on adjusting the clutch on my Case 446 Garden Tractor? Thanks in advance. Ed

I have a case 446 tractor 80 or 81 model bad engine broke rod. What is the remainder of the tractor worth to some one make offers I am located in Nebraska.

does anyone or can anyone help me find out how to hook up a tiller on the back of this 446.i had a 444 at one time and took it all apart,but did not remember how it went back together.in need a...

Is there anyone out there who has had any dealings with the 74' Case 446 engine shrouds. I'm trying to change the intake gaskets and replace the carb and it would appear I have to take apart the...

Hello all, I just purchased a case 446 Hydriv. I am wondering if there is a 3 point system available with a PTO for this unit

Looking for a wiring diagram or a Case 446 Tractor

Anyone have advice for the 16hp onan??? Just wondering why it self idles up and down on it's own? Any help would be greatly appreciated!!!

Just wondering if anyone know's why the 16hp onan would be self idling up and down by itself. I'm new to the tractor forum and tractor mechanics altogether.

Hi, all. I Googled Case 446, as I saw one for sale today. Lucked onto this site. I Just missed a 10hp Cub Cadet with mower and snow blade for $400, and I need a rugged (probably older) garden...

Just picked up this 446 and wondering how to tell the year. I need this info so I can find the correct manual. Thanks.

Hi I've been talking about buying a case 446 how ever I don't know much about them other than they are a good investment. I've yet to see it but I was told it has the hydraulics in the front for...

Anyone have this problem? The spare transaxle I was going to swap into my 646, upon inspection, is missing the inner brake drum shaft bushing. It would be hard to remove, no debrie in lube. Did it...

i have a case 446 i aguired when my dad passed away, i got it to run last year but never ran like it should. it kept reving up and down. i,ve since learned the onan motors are bad for this. ( a...

i have a case 446, i have an electrial problem, there is fire going to all parts, fuel to carb, turns over great but will not start. wondering if it could be ignition switch. i have a wiring...

no pressure to make fuel pump work. fuel pump is good and bolts to carb on 16 horse power onan engine. whats wrong? roger

Howdy Everyone. Just a quick hello, and some pics of my freshly traded for, Case 446. Any advice, suggestions, or cavaets would be much appreciated.

Hi folks, I just bought a Case 446-77 in fair running condition with a rototiller, 2 way woodsplitter, plow and snowblower. Has an Onan engine. Paid $1350 for the tractor. I felt it was a fair...

Hi, I am a newbi and I need some help for my case 446 tractor. I have suit case weights for the front and I want to know some more info about them. for example, are they common, expensive, and...

I am trying to find tiller tines for my case 446 tiller can anyone help me out ? thanks

Hey guys im new so please be gentle. I'm not sure how all this works on this site but here it goes, got two case 446's that do not run, what kind of repower options are out there?

I was browesing thru here and noticed that there wasnt much posted about these little case tractors. I know that people up north see these all the time, but there arent nearly as many down south...

I'm looking for the brackets to mount my factory snow blade to my 446. I just put a Briggs Vangaurd motor on this old tractor and it works great the only problem is that some idiot (me) cut up the...

it sqeels and dosnt want to move really bad when its hot. i got another used hydro motor and put on a little better. but is it hydro motor or hydralic pump.please help.

Hello. As a new member, I thought I would start off with an good one to ponder.. I have the opportune to purchase an older Case 446 (don't know the particulars yet, guessing mid '70s) for $300. It...

Hello. I just purchased a case 446 that needs some trans work. Can anyone tell me if all the trans gears from a 224 will fit in my 446? Thanks.

I need advice and a wiring diagram on how to fix the starting problem. Please send any info to Lionsfan815308@gmail.com THANKS!!!!!!!!!

Hello everyone, I am brand new to this site and am a brand new lawn tractor owner. I bought a case hydraulic lift 446 last year, it has an onan 18 hp and I have no idea what year it is. Last fall...

I am looking to buy a garden tractor to mow a 2 acre lawn, and possibly plow a small drive way.I have found a kubota g4200 with low hours and a case 446 (red in color)that is in good shape also...

I have an older case 446 with a single stage blower. I want to convert it to a 2 stage blower. Bercomac makse a blower that fits but only if the engine rotates counter-clockwise when looking from...

I am wondering if anyone has built a ROPS for theirs? Dan

I just acquired a Case 446 tractor from a friend. His Dad bought it new in 1978. The machine has hydrostatic drive, 3 point hitch, mid mount mower, snowblower, cultivator, single furrow plow...

Anyone know where i can get good used parts for this tractor? My dad tore this thing apart to fix something about 15 years ago, and it has yet to be re assembled. its in worse shape now than it...

Does anyone know anything about used Case 446 garden tractors (or similar)? I think it has a 16 hp engine. It has very large rear wheels. I thought I heard that Case made a solid unit. I am...

My 1978 Case 446 stalls and backfires when mowing. It seems like it gets really hot. Once it stalls I have to let it sit awhile before the starter can turn it over. The deck bearings are ok, spark...