I have a John Deere 2010 that just recently started to have the generator light stay on constantly. As soon as you apply RMP's it wants to stall out. It recently had a tune-up done and everything...

Hi, I own a 1961 John Deere 2010 gas construction model with loader. It runs great (even though I know it's considered a lemon) but when you start it up, the 3 point raises up on its own and keeps...

I bought a 318 new in 89. Life got in the way and I had to sell it a year later. Always wanted another. About 3 years ago one of my lawn customers said I could have his 318 with a broken rod for...

Hello everyone. Anyone out the have an exploded view diagram of the headlight and mounting hardware on a john deere industrial 2010, same as other 10 series industrial. ?? There are two 3 1/2"...

John deere injector pump don't work

1960's John Deere 2010 utility tractor power steering issue. I am a retired Mechanical Maintenance person wanting to help my son, who is a hobby farmer. I am looking for some verbal help or...

Just got my grandpa's '62 JD 2010 (gasser) running after ~8yrs of sitting. We had slight overheating problems the last time it was running. So I got it running again (carb rebuild, new fuel lines...

My 1964 JD 2010 starts right up but doesn't like to run. Whether idling or moving, it will just quit after around 20 minutes of running, or about the time the temperature gauge hits "normal", and...

I broke and lost both adjustable brakes actuating rods and had to purchase two more. My question is, I never saw what type of nut was on the end and I can't tell from the manual/diagram if the...

Hello, I am new to the tractor world. We have a small farm. We bought a 2010 for a good price and seems to be a decent little unit. Lacks a little power but it is working. Last night clearing a...

I know it was a huge mistake to buy one, but I didn't know that at the time so here I am. There is a plate in front of the drain plug for the transmission its at a angle held on with 4 bolts and...

I just finished replacing the hydraulic filter and oil for the three point hitch. Hooked up the bush hog to the tractor to test the hitch, the hitch worked really good. Pushed the PTO level to...

I attached a bush hog to my 2010 to check it out. The PTO engaged just fine no problems there, but the 3 point hitch stopped working. It would not go up or down with the lever by the seat, my...

I recently bought a 1962 John Deere 2010 with a diesel engine. It smoke intermittently like one of the cylinders is not burning clean. I have changed the fuel, put in new fuel filters and other...

I have a John Deere 2010 diesel , it takes 10-30wt. oil. Should I use the regular or the synthetic oil? Thanks

I took all four of my Turbulence Chambers out of my John Deere model 2010, I noticed none of the holes in the bottom of them were the same size the different's is any where from 3/16" to 5/16". My...

After taking out my four Turbulence Chambers and cleaning them (they were real bad built up with carbon) and I replaced the glow plugs and O-rings. I put everything back on the tractor and now...

My John Deere 2010 has 3 point problems. It will quit working, but will work again after I take the hydraulic filter/screen out and clean it. This may last a day or two and then must be repeated...

Hello folks, My neighbor has a John Deere tractor 2010 ( I think he said it is a 1963) and I am trying to help him work out several issues he is having with it. Alternator isn't charging...

Hi everyone, I just aquired my first real tractor, a JD 2010 with the gas motor. Before I haul it all the way out to my hunting property, I wanted to do some fluid changes, etc, in the comfort of...

my power steering quit working i have 3 pt anrd remotes the flow devider moves freely

Hello everyone, I am in need of some advice, I was bailing with my jd 2010 and all of the sudden the bailer stopped. I have used this bailer and tractor for the last 4 years and I have not had a...

Im looking for some info or experiance with problems for my 2010, love the tractor (was a suprise gift from my wife and family after my 3rd tour)... thing runs fine with little hick ups.... let my...

The distributor cap on my JD 2010 does not appear to be the correct one. It is my understanding that the 2010 came with either a Delco, a Prestolite or a Wico distributor. My distributor body has...

I'm trying to decide between a WD45 Diesel and a Deere 2010. I'm mainly looking for something for plowing, bushhogging, and, later on, using a loader for mulch and whatnot. I know I'd have to do...

Good day, I recently purchased a used tractor. The serial number is nowhere to be found. I have established it's a John Deere 2010 industrial loader backhoe. 1960-1965 The previous owner did a...

I was having problems keeping my John Deere 2010 (Diesel) running, now it will not start I found that someone had replaced one of the steel diesel fuel lines with a rubber hose. I purchased this...

Hi I am restoring a 1966 John Deere 2010 and currently having issues with the hydraulics, basically we cant get the 3 point linkage to go down, however no problem going up, we have pulled the...

Replacing starter. The original is a prestolite with the solenoid inside the nose cone. Parts are no longer available from my rebuilder. I got a delco direct replacement. Problem is that the...

Looking for a John Deere 2010 diesel cylinder head, anyone have one for sale ? I hate to throw this tractor away over a head.. please help

Just purchased a 2010 JD gas model, I know nothing about how to shift or use the lifting levers. Tractor has been sitting outside for the last 5 or 6 years, Just got the motor started, had to...

I have a 2010 gas engine ser num w30044. Id like to know if I can put a pto and 3 pt hitch on the back. Its has hyd to the back for the hoe. It has a plate on the rear for the pto?

I am restoring a 1966 JD 2010 diesel and am having issues with the hydraulics, whilst trying to fit a FEL it would appear the lift arms at the rear have stopped working, the cold start leaver...

Hi Forum. When I bought my JD 2010 the seller said that the refill point for the hydraulics was at the brakes-side of the tractor at the back end of your foot. There is a size 1-1/8 inch nut but I...

Hello forum. Just after buying my 'new' JD 2010 (19630 I had the bad luck to break the key! So I went to the fence cut of a piece of wire, bent it and pushed it in the slot of the tractor. And it...

I have a 1961 jd 2010 (gas) this tractor was used exclusively at several nurseries. at some point in time there was a front loader added to the tractor. to get to the point here, the pto and 3...

Was wondering if any body knew if theres any tricks to putting the pto housing back in a jd 2010 ? the old one was cracked in half so I didn't half to take the rock arm housing off to take any...

Have a 1961?? JD industrial wheel loader. I burned out the power steering pump by towing it. I didnt have the gear selector in the tow position. I hear the pump is in the trans. Where?? how do I...

Looking to use my father in laws post driver that he has set up for his mid 60's JD 2010 on my 92 Case IH 595. He bought the driver 30 + years ago and at the time the dealer changed out the...

after starting the tractor in below freezing temps and allowing it to warm up, when a gear is selected and the clutch is released, the left rear wheel is locked. if rocked back and forth, it will...

need to replace gear in pto gear box - looked at jd 2010 parts breakdown - looks like you remove 6 or 8 bolts and the gear box would come off - removed the bolts and found somethign is attached...

Hi everybody. This is my first thread i posted. I have been lurking while I buy a tractor but I probably should have gotten on here sooner... So I pulled the trigger based on what I have...

Recently bought a 1965 John Deere 2010. It has no power steering. I am trying to figure out how to tie into the lift system so I can run a hay bine. Need help.

Hello :laughing: I am new to this forum. I have a John Deere 2010 gasoline tractor. When I start it it will start but as soon as you let go of the key it will die. I just replaced the ignition...

Hey! New Member here. Have a 1962 JD 2010 that I need to tune up. Can't find the info anywhere, so does anyone know what to gap the points and plugs at? Thanks!

I WAS THINKING OF BUYING A 2010 JOHN DEERE FROM A LOCAL RESEDENT .THE MAN HAS IT LISTED ON CRAIGLIST. SO I CALLED TO ENQUIRE ABOUT HE TRACTOR,HE TELLS ME THAT THE MOTOR NEEDS NEW SLEEVES .MY...

The thing is worn out! Prestolite 10 tooth, gear opening on left hand side, NO solenoid, uses a mechanical copper button on inside to engage starter to fly wheel. Any you old timers have parts...

I have a 62 model 2010 jd diesel I just changed my voltage regulator so I need to polarized it correctly and I don't know which two terminals to jump off I have L BAT and F it also still has a...

I have a 62 John deere 2010 hydros with the box blade hovering about a quarter inch off the ground and it wants to jump kind of or shake almost

I have a 62 2010 row crop tractor runs great tranny shifts great too. The syncro range is a little noisy is this normal also I'd like to change the fluid in it is there a full plug on the side...

I recently purchased this unit, and have a couple questions ; -Where can I find service manual info that can be downloaded ? -Have a problem with 3 point hitch function, was working fine...and now...

I know this is a long shot, but a good friend is trying to restore a 2010 that he got in pieces, including the seat mechanism. It's got the deluxe seat support and suspension. He has the service...

I know this is beating a dead horse..... But recently bought a john deere 2010, I know some of you say they are junk. Oh well, I bought it anyways. It runs fantastic. Starts perfect and runs...

I just ordered a carburetor kit for my jd 2010. I've put a kit in my four wheeler and part of a kit in a Holley 600. This one seems real simple but if anybody has any advice where to start on...

I just installed new plugs, wires, cap, rotor, points and condenser. I have power to the coil but no fire at the plugs. I need help making sure the wiring is connected right in the distributor...

Looking for a new deck sleeve plate. Anyone have any good sources on some new old stock? part number is AT15762

My friend (old MF dealer) and I are struggling with the PTO on the 2010. It would engage with the lever but quickly throw out. We dismantled down to the lever arm adjusting turnbuckle(?) but it...

I just got a good deal on a 1965 jd 2010 that needs a little work. I'm going to fix whatever is wrong and clean it up and either sell or trade it. What is a fair price for this tractor in fair...

2010 JD gas: The PTO will engage with the lever but quickly slips out. Can the pto gears and shafts be reached by removing the rear plate or is it more complex than that. My friend who traded me...

My dad has a 1962 John Deere 2010 and it some what pretty jumpy(leaps forward) when you let the clutch out. Is this common?

Not sure if this should be posted in a JD forum, but it may be a general question? Have a 2010 diesel and the starting process is to turn the key, hold a minute and a half for the glow plugs to...

My John Deere 2010 Back hoe has air coming out of the air intake. I know it needs to have the injectors rebuilt, but as far as the air coming out the intake is it a form of blow-by or something else?

While clearing some trees on my father's farm I notices hydraulic oil dripping from the front of the tractor under the radiator. I put the tractor back in the barn and planned to check it out on...

Has anyone had any experience with a rebuild on a 60's 2010 gas engine (I4)? Mine's getting very weak and smoking from the down tube. I put a call into my dealer and he ballparked a rebuild at...

Does anyone know if there is a paper air filter to replace on my 1963 2010. I also wonder what kind of oil is that in the filter. Do I just put new oil in the filter pan? My local dealer does...

I have a jd 2010 1963 i think. It seems to bo a little down on power and blows smoke out the breather tube pretty good. the last cylinder up near the radiator fouls out too every so often. it...

Hello, Where could I find/or does anyone have a wiring diagram for a John Deere 2010 (gas) tractor? Thanks, Mike

This has been a pretty good old tractor, it is only used about 12 hrs / yr. The last time it was used, it ran good, it was shut off with the jd shut off cable and left pulled out. It sat for 2...

For almost the same cost I have located three older tractors nearby. All are gas engines, the Deere and IH don't have working tachs so no real idea of the hours. The Massey has about 1800 hours on...

Hello, Looking for useful info on this model I recently purchased. Thanks

JD Model 2010W serial #62096 Need help with removing the hydraulic reservoir. I have taken off all the bolts I can find but at the bottom of the tank it looks like there is a pivot that is holding...

I own a John Deere 2010 crawler loader with a Deere "quick connect" 50 backnoe. I have owned it for 30 years. Over that time I have rebuilt the engine and the transmission, and it runs fine, but...

I broke the one hinge on my 2010, JD 3320 factory cab. What is the part number for the door hinges? Anyone know where to get best price on hinges? Is the hinges hard to change myself? Thanks!!

Hello, I have a JD 2010 Backhoe, Does anyone know the loader # or the Backhoe # on this 2010 industrial machine? any help? Thanks Jim jimgroth@att.net

I am thinking about getting a small crawler to keep my woods roads open in the winter. I found a jd 2010 with a blade that is running and in my price range and am wondering what kind of work I can...

the three pt hyds will not work i have the filter out what should it be cleaned with,it appears that the pump is working,it has fluid at the lines to the loader,but it does not lift .any...

My 3 point hitch and power steering not working. This has been a on going problem. Is there any other filters beside the round one in the bottom of the tractor.

I just bought the tractor and want to change the oils. Does anyone know how much oil it holds. I found that the hyd. is 8 gallons I believe?? not sure on the engine oil? I see 2 brain plugs under...

I've got a friend looking at a 64 or 65 JD 2010. What I've read about this particular model isn't particularly encouraging, but if anyone out there has either first hand experience or "reliable"...

I posted this on the JD site, had a lot of lookers but no posters so I thought I would give Parts and Repairs a shot. I own a 1965 JD 2010 Row Crop that has had a couple issues with the rear hub...

I own a 1965 JD 2010 Row Crop that has had a couple issues with the rear hub and hub cap that holds the wheel to the axle. The first time the wheel actually fell off the tractor because the key...

It started with the hydraulic fluid coming out of the steering wheel shaft. And now this is where we're at.

We have a JD 2010 and the PTO is giving us problems. When we engaged the PTO the tractor would bog down and quit. Then I guess it broke a shearpin and now it does not bog down but the PTO will not...

jdown-ML-757434-ML- JD specific post

I am having problems with my sediment bulb leaking and haven't been able to get it to stop. Any one know if there is a replacement for the sediment bulb. I was thinking about an in line fuel...

This is my 1st post! I just bought 30 acres in Central Texas. I'm thinking about buying a John Deere 2010 Bulldozer (this is all the info that was given to me). I haven't seen the machine yet...

am looking for info on this backhoe 2wd regular hoe hours unknown runs good also was told the front hydraulic pump was replaced is there a separate pump for the rear backhoe?????? How much should...

am looking for info on this backhoe 2wd regular hoe hours unknown runs good also was told the front hydraulic pump was replaced is there a separate pump for the rear backhoe?????? thanks in...

Is the John deere really as bad as I have read on other sites? I have read on it and there are several people who said that htye would not own one, but several others who said that they would not...

Does anyone have an injector pump timing proceedure including the oil pump position for a JD2010? I have an I&T manual, which is totally inaccurate in many respects including this one...

I am posting this for a neighbor, he has a JD2010 (Hope I got that right) and needs an Injector Pump for it. He doesn't want to spend $500.00 for a new one. Any suggestions where a used or...