FIRST Tractor- Kinda nervous!

   / FIRST Tractor- Kinda nervous!
  • Thread Starter
#11  
Nervous guy--congrats on your new tractor and implements.

With 35 hp and 36 acres I probably would have selected a 60" rotary cutter.

Some people consider the 3pt hitch-mounted auger (aka post hole digger, PHD) to be one of the most dangerous tractor implements. Be careful. And be sure you have your BF pipe wrench and a long cheater pipe to extract an auger that's jammed in a hole.

I only have about 1.5 acres of pasture that I cut once or twice a year and if I get it done too quick, I dont have enough beers!:p
I use my 54" Kubota GR2110 to mow my clover plots and lawn. Its an awesome machine.

"BF" pipe wrench? J/K...I know what you mean!
 
   / FIRST Tractor- Kinda nervous!
  • Thread Starter
#12  
When using the implements around fencing go slow and watch when you turn.
It's amazing how much fence you can knock down with the loader and bushhog. :D

Have fun with your new tractor!

That would be VERY bad for me as my neighbors cows would get out!
Thanks for the tip!!!
 
   / FIRST Tractor- Kinda nervous!
  • Thread Starter
#13  
OOPS forgot to mention, it is 4wd. I also have plenty of hills.
 
   / FIRST Tractor- Kinda nervous! #14  
If you don't already have them, budget for the following. Wants grow up and become needs...

Trailer
Welder
Bigger Truck
Bigger Barn
Another Tractor
Bigger Trailer
Better Welder

And so on...
 
   / FIRST Tractor- Kinda nervous! #15  
What RPM to use the rotary cutter? The auger? Also High, Med. or Low hydro select?

Little John - As for the RPM's for the auger, I would recommend just enough to keep the engine from stalling on the hole you are digging. My idle RPM's is around 1350 and I usually dig at 1500 RPM's or less. My Leinbach manual says to dig at "just above idle". You will be suprised at the digging power at low RPM's. Also, it's much safer to start your hole at low RPM's.
 
   / FIRST Tractor- Kinda nervous! #16  
Nervous guy--congrats on your new tractor and implements.

With 35 hp and 36 acres I probably would have selected a 60" rotary cutter.


Some people consider the 3pt hitch-mounted auger (aka post hole digger, PHD) to be one of the most dangerous tractor implements. Be careful. And be sure you have your BF pipe wrench and a long cheater pipe to extract an auger that's jammed in a hole.


I was going to suggest going with a 6 ft mower myself. I think he has plenty enough tractor for it anyway, unless he got the 4ft on purpose. Like if wanted to get it in somewhat narrow spots, then I would have probably suggested the 5ft like you mentioned.

As for the auger, you will need to come up with a good way to park it when not using it. THat is the most unwieldy and aggravating implement you could ever buy to use on a three pt hitch. You might want to consider either suspending it from a handy treelimb, or put a couple of 4x4x10's in the ground and add a cross bar over the top to suspend the PHD from.
Like already mentioned, the PHD is one of the most dangerous implements. When using it, make sure no one is anywhere near it except to position it, then have them step back several yards before engaging it.

Since this is your first tractor, take it slow and easy at first and become very familiar with how EVERYTHING and EVERY PART of it works. Give yourself time to learn how it reacts to the different commands you give it. Become familiar with the turning radius with implements attached, note how far out they extend from the tractor front and back.

Wear safety glasses, good leather gloves, and ear plugs when needed. If you're cutting some real tall grassy/brushy areas for the first time, walk over them best you can before starting mowing to spot stumps, logs, stumpholes, scrap metal, or any IMMOVABLE objects!!! Nothing worse than one front tire slamming into a hidden stump and then having both front wheels make a hard turn at speed!

Always wear a cap or hat too. Helps some when/if you mow right on top of a hornet or yellow jacket nest!! You can at least use it to swat the buggers away from you some! LOL.
Keep your cell phone with you in your pocket in case something bad should happen. At least that might give you a fighting chance should the unthinkable happen.

Oh yeah, keep reading tractorbynet!!! There is a veritable wealth of wisdom and knowledge here!! And the pictures are pretty interesting too if you love tractors! Good luck and be safe with it.
 
   / FIRST Tractor- Kinda nervous! #17  
you might want to load the rear tires at least half way with the FEL. Read your owners manual inside and out, make notes in margin when needed, when using the tractor refer to the manual over and over again. Keep the rpms up when working 1800 rpm




I've heard/read that if you load tires to always load them about 3/4 way full so the rims are always covered with fluid. This helps reduce the chance of them being exposed to air which can accelerate rust on the rims.
 
   / FIRST Tractor- Kinda nervous! #18  
Hey Little John,

Get yourself a left step and a block heater. We got ours a couple months ago, it's a great little tractor. Still getting use to it. Did you get the SuperSteer?? That step makes it a lot easier getting on and off.
 
   / FIRST Tractor- Kinda nervous! #19  
As for the auger, you will need to come up with a good way to park it when not using it. THat is the most unwieldy and aggravating implement you could ever buy to use on a three pt hitch. You might want to consider either suspending it from a handy treelimb, or put a couple of 4x4x10's in the ground and add a cross bar over the top to suspend the PHD from.
Like already mentioned, the PHD is one of the most dangerous implements. When using it, make sure no one is anywhere near it except to position it, then have them step back several yards before engaging it.
quote]

A stand similar to this works quite well and cost about $25 for materials.
 

Attachments

  • PB040025.JPG
    PB040025.JPG
    104.1 KB · Views: 214
   / FIRST Tractor- Kinda nervous! #20  
Ok, I am buying a New Holland T2220 tractor(hydro-35hp.) with loader. I also added a 6' rear blade, 12" auger and 48" rotary cutter, all Rhino equipment.
I will be using the tractor for some snow removal, food plots, general work on 36 acres.
What pitfalls should I watch for?
Any Advice with the Hydro on hills or working with the equipment?
What are the most common newbie mistakes?
THANKS!
John.

Why the 4' mower? should handle 5' easilly with that hp.. if not more.like 6'.

My EX NH 1920 spun a 5' and 6' mower fine.. it was 29 at the pto.. and about 33 at the engine..

soundguy
 

Tractor & Equipment Auctions

Deere 9970 Cotton Picker (A53472)
Deere 9970 Cotton...
JOHN DEERE CP 770 (A53084)
JOHN DEERE CP 770...
PLEASE VIEW ALL PICTURES!! (A50775)
PLEASE VIEW ALL...
2006 Ford F-150 Pickup Truck (A51692)
2006 Ford F-150...
2023 John Deere 410R Sprayer (A53342)
2023 John Deere...
10' WROUGHT IRON SITE FENCE (A51248)
10' WROUGHT IRON...
 
Top