Quick Hitches 3-POINT QUICK HITCH

[AlexanderEquipmentCo]

AndyMA,

I don't know if you've seen our advertisement above, but you should check out the Delta Hook. Our system is adjustable and fits nearly all three point implements. See our website at Delta Hook Homepage or give us a call at 864-404-5614. We can answer any questions you may have.

 

[Texas Dodge]

bought it in Nov and haven't even worn the nubs off the tires yet? .... you need seat time.

 

[kbuegel]

I noticed a rubber strap going between some of your hitch pins on your 3-point, do you have problems with the pins falling our? Or is it just a convenient place to keep a strap?

 

[EZ-HITCH]

I noticed a rubber strap going between some of your hitch pins on your 3-point, do you have problems with the pins falling our? Or is it just a convenient place to keep a strap?

Kubota's come with a rubber strap that runs from one lift arm to the other. Looks like he has his running vertical because of the HF hitch system.

 

[papafoxtrot]

I've got a related question. I've had a JD Ballast Box on my 3520 since new and it goes on and off the iMatch without issue. I just pick up a Wallenstein BX42 chipper and I couldn't lift the thing off the pallet it came on without raising it up. Seems I couldn't drop the 3Pt down low enough to get under the attach points. I finally got some more boards under the Wally so I can easily take it on and off but just doesn't seem like it should be that way. Looked in the manual to see if I could adjust the low end height of the rock shaft but nothing. Am I doomed to always have to make "parking stands" for my implements?

 

[nomad]

Weight: 60 lbs.

$89.99

$90 / 60lbs = $1.5/lbs

Considering that the raw material price worldwide is around $0.75/lbs, and that it has forged parts and machined pins, etc. THIS price $90 is very good price. It is EITHER their old price (before the increase of raw material prices) OR made in China.

 

[Johndeere3720]

And I payed $225 for an imatch that made me modify my boxblade.

 

[ninefinger]

See 'My Harbor Freight Quick Hitch' under the Customization catagory. There are two different models of this hitch. I got the one with an inside clearence of 27.5 verses the other one with 26.5.

This is the secret of these hitches, buy the correct one.

 

[Altex]

See 'My Harbor Freight Quick Hitch' under the Customization catagory. There are two different models of this hitch. I got the one with an inside clearence of 27.5 verses the other one with 26.5.

This is the secret of these hitches, buy the correct one.

Or just get Pat's Easy Change that will fit with Any Width of your Attachments. And it's not a secret!

 

[ninefinger]

Or just get Pat's Easy Change that will fit with Any Width of your Attachments. And it's not a secret!

Pat's appears to be a well made unit and I remember him defending his pricing some time ago in a tread. I have no problem with his price, it was a bit high for me when I could get a HF for $60. The best unit I see out there is the Delta but I have too many implements to even consider that option. It appears one has to dismount the tractor to lock Pat's lower captive pin, I can hook up and never leave the seat.