radioman
Super Member
heyman- its for BX's with 4 digits instead of 2.
Does anybody have remotes on their BX?
- Thread starter jnjpream
- Start date
- Views: 9126
CHDinCT
Veteran Member
I installed the Kubota dual remote kit on my BX1860. I've read here on several occasions that it won't fit the TLB models, but I'm wondering if you could order the kit and use the valve that mounts to the side of the HST and the levers that mount in the empty lever slot, but not use the pipes that come with the kit. I'm assuming the way the pipes route or/and mount interferes with the backhoe setup. Instead, use flexible hoses to mount the remote QC's someplace that works on a BX24/BX25. Just a thought.
At less than $400 ($320 in my case), it's a heck of a deal for a dual remote setup. I see people paying close to $1K for a single remote set up on the larger Kubotas and that's just for the valve, etc., with no dealer installation. Obviously, those setups use larger valves, pipes, etc. for higher flow rates.
At less than $400 ($320 in my case), it's a heck of a deal for a dual remote setup. I see people paying close to $1K for a single remote set up on the larger Kubotas and that's just for the valve, etc., with no dealer installation. Obviously, those setups use larger valves, pipes, etc. for higher flow rates.
crvoss
New member
radioman
Super Member
does anyone have pics of the before and after aux kit installed ? I think that many including me love the levers idea and would love to incorporate it somehow. I dont think its hard to mock up the levers, but just need a template of the levers and parts list to do so. we just need a volunteer to come up with a new kit for the TLB's bx's.
I have the time to do this- but not the money
. Anyone up to donations to fund this idea?
I have the time to do this- but not the money
. Anyone up to donations to fund this idea?
CHDinCT
Veteran Member
does anyone have pics of the before and after aux kit installed ? I think that many including me love the levers idea and would love to incorporate it somehow. I dont think its hard to mock up the levers, but just need a template of the levers and parts list to do so. we just need a volunteer to come up with a new kit for the TLB's bx's.
I have the time to do this- but not the money
Here's a good how to thread that inspired me to get the kit. Good pic's too.
http://www.tractorbynet.com/forums/kubota-owning-operating/125660-bx7326-rear-aux-kit-install.html
