ben2go
Gold Member
Up above the Piedmont in NC is a beautiful place you know. Get above the bugs, tourists and humidityIt's never too late.
Dave.
I have been all over SC and NC.You can't escape those things.I live on the SC/NC state line.
Up above the Piedmont in NC is a beautiful place you know. Get above the bugs, tourists and humidityIt's never too late.
Dave.
I'm looking for suggestions/input as to heat for a workshop. The shop is 24' x 28' and well insulated including an insulated garage door. I use the shop a couple hours a night a couple of times a week and usually a few hours on the weekend. I'm in North MS so temps in the 20's - 30's are our normal lows with occasional teens and seldom single digits. I was considering one of the electric edenpure heaters (about $400), a cheap walmart electric heater ($70), or maybe a propane heater ($?) using a small tank. Any input would be appreciated. By the way this a tractor related project because the tractor is kept and serviced in the shop.
I have been all over SC and NC.You can't escape those things.I live on the SC/NC state line.
Well, there you go ruining my memories.![]()
I saw mosquitos mean enough to make a grown man run somewhere on the NC/SC coast at a KOA campground. They rose in squadrons out of these shrubby trees not far from the beach around dusk. It was too hot to cover up and too bloody not to.
I don't recall any of that up off the plateau.
Dave.
The Mr. Heater models that mount directly to the top of a 20 lb cylinder are a good choice for portable directable radiant heat. Run times are good, 30 - 50 hours on the single head model.
If you need additional light, a $26 1000 watt halogen work light is a good supplement.
Yes, that is indeed alot of money to invest in a garage heater, especially when it would only be needed occasionally. I think I would prefer to find one of the used mobile home furnaces for a few hundred bucks.
I use a Reddy heater, it can run on just about anythingI can use diesel or heating oil, JP-8 etc. Some people have burned used transmission fluid in them with out any problems. The old Reddy heater site is down or I would give you the official list of what they can burn.
This list sound about right? I'm running mine of heating oil now. I have burned kerosene and diesel.
DESA R40 PORTABLE FORCED AIR HEATER 115V
They are forced air so you don't actually need a ton of BTU. Also since its forced you can always point it at you while working if the shop is still cold. I have a 70k BTU unit and no insulation what so ever. Only problem is it gets to warm and I have to turn the thermostat down. This has to be the best heater I have ever owned hands down.