JD 955
- Thread starter jxhopper
- Start date
- Views: 10974
-
- Tags
- john deere 955
The MMM is a good system but is difficult to remove and install when the times come. I now use a 7' rear finish mower. 2 pins and a pto hookup and its on to green fields. There are plenty of other things that your hydraulics control will run. Anything requiring up to two 2-way cylinders. This includes a front snow plow, cement mixer, hay mower, front loader, top link on the rear hitch, log splitter, etc.
By far the most use will be a front loader. Then you're gonna need another 10 - 20 acres to enjoy it with.
(Get the canopy for it) !
By far the most use will be a front loader. Then you're gonna need another 10 - 20 acres to enjoy it with.
(Get the canopy for it) !
I was already thinking of the canopy. Where's the best place to get one of those? JD dealer? I think the AgTurf dealer near by me may have went out of business. I drove by the other day and it was completely empty.
How much does the canopy sell for?
Thanks for the input ZZ!
I was under the impression that the MMM was easy to hook up. I was told you just drive over it and latch it up. Is that not the case? Why is it a pain?
How much does the canopy sell for?
Thanks for the input ZZ!
I was under the impression that the MMM was easy to hook up. I was told you just drive over it and latch it up. Is that not the case? Why is it a pain?
jbarker855
Silver Member
jx-
I have a JD 855 with 60" MMM. Mine is probably a bit lighter than yours, but I take it on and off all the time without difficulty. Takes me less than 2 minutes.
As Kennyd said, the trick is to take it on and off on a hard, smooth surface. Messing with the MMM on grass would be much more difficult.
The first few times I took it on and off, it took me much more time. Now, I learned several important things, such as to lower it ALL the way first, not just down to regular cutting height. Also, I had to lube up a few pins and levers to get things moving smooth. Sounds like you got a great deal on your new machine. Have fun!
-Jay
I have a JD 855 with 60" MMM. Mine is probably a bit lighter than yours, but I take it on and off all the time without difficulty. Takes me less than 2 minutes.
As Kennyd said, the trick is to take it on and off on a hard, smooth surface. Messing with the MMM on grass would be much more difficult.
The first few times I took it on and off, it took me much more time. Now, I learned several important things, such as to lower it ALL the way first, not just down to regular cutting height. Also, I had to lube up a few pins and levers to get things moving smooth. Sounds like you got a great deal on your new machine. Have fun!
-Jay
I'm glad you posted the links to the manuals because I need to get some, the owner did not have them.
Thanks
The listing for the 72" MMM does not have a link. Does this mean I can no longer get the operator manual for it?
John Deere Ag - New Equipment: Technical Publications - Publications Search
John Deere Ag - New Equipment: Technical Publications - Publications Search
Also I don't see the Owner's manual in the link you sent. For starters that is the most important one I'll need. Am I missing it there?
Also, my serial # is 300903. I see multiple manuals for the engine guide for instance. 2 listings for the North America Tractor.
I also entered the part number and title for the MMM here and got no hits.
http://techpubs.deere.com/deere/Default.aspx
TITLE: 72-Inch Mid-Mount Mower - 855 & 955 Tractors
part # : OMM93936
Am I doing something wrong?
Ezlivn
Silver Member
JX...I too am new to tractors. I just bought the baby brother to yours a 2001 JD790. I have the FEL but no mower...and no we can't swap. lol
Good luck and enjoy!! I love mine!!
Good luck and enjoy!! I love mine!!
