Locating chains

   / Locating chains #1  

woodyacres

Silver Member
Joined
May 18, 2008
Messages
117
Location
SE Michigan
Tractor
Kioti DK35SE
I don't have a welder or anything so, I wanteto quickly mount some chains on my tractor. Here's what I did.. kinda tacky, but it works.
 

Attachments

  • chains.JPG
    chains.JPG
    379.7 KB · Views: 1,086
   / Locating chains #2  
I use a 4-6" pvc pipe about 18"long{I thinK} to hold my chains, just hook the sides and drop the chain into the PVC bucket{cap on one end}. I drilled and ran wires on one of mine instead of a cap so that dirt and such could fall through.
 
   / Locating chains #3  
4" PVC pipe and a couple of large hose clamps around the ROPs. An old milk crate can be mounted on the brush guard also for goodies. I drilled a several drain holes in the cap at the bottom.

JW5875
 

Attachments

  • P1050001.JPG
    P1050001.JPG
    58.1 KB · Views: 586
  • P1050003.JPG
    P1050003.JPG
    61.6 KB · Views: 534
   / Locating chains #4  
I don't see anything wrong with expediant solutions to problems. I don't think I would put chain in glass jars however. I carry stuff like that around in my bucket, can't get more expediant than that
 
   / Locating chains #6  
Yup, any kind of storage (except the glass bottle) is acceptable.
I made a specific chain box out of an old ammo box which was given to me by my good friend Larry G. Attached it to the fel tower for easy access. It opens from both top and bottom, so when the chains are inside, I flip the bottom open and the chains drop out. My wife's tractor has the same set-up. Here is the thread to that:
Another Chain Box/Tool Box

 
   / Locating chains #7  
That aint a glass jar.
 
   / Locating chains
  • Thread Starter
#8  
I don't see anything wrong with expediant solutions to problems. I don't think I would put chain in glass jars however. I carry stuff like that around in my bucket, can't get more expediant than that

Those were two plastic containers.
 
   / Locating chains
  • Thread Starter
#9  
Yup, any kind of storage (except the glass bottle) is acceptable.
I made a specific chain box out of an old ammo box which was given to me by my good friend Larry G. Attached it to the fel tower for easy access. It opens from both top and bottom, so when the chains are inside, I flip the bottom open and the chains drop out. My wife's tractor has the same set-up.

I wish I could find a couple of those.. they rock! Good idea.
 
   / Locating chains #10  
great ideas.... im sure going to borrow some of them
 

Tractor & Equipment Auctions

2015 Volkswagen Jetta TDI Sedan (A50324)
2015 Volkswagen...
Portable Cattle Loading Shute (A50515)
Portable Cattle...
JOHN DEERE 450H CRAWLER DOZER (A51406)
JOHN DEERE 450H...
2018 GENIE GTH-636 TELESCOPIC FORKLIFT (A51242)
2018 GENIE GTH-636...
2013 FREIGHTLINER CASCADIA DAY CAB (A51219)
2013 FREIGHTLINER...
BANDIT ZT1844 RUBBER TRACK STUMP GRINDER (A50458)
BANDIT ZT1844...
 
Top