BX1860 or 2360?

   / BX1860 or 2360?
  • Thread Starter
#21  
To the OP: You began with saying, "Both would be overkill".

You also mentioned your wife and her preference for keeping within a budget.
You mentioned limiting your size due to gates, shedding, etc.

From all that, I'd say keep your money. If the BX1860 is overkill, then so be it. You are gonna love it!!! I love mine. Want to see it work?

YouTube - DSCF1634.AVI

YouTube - BX1860 Working II

YouTube - BX1860 Working


Are those larger tires? Looks like they are. Thought you could not get the larger ones to fit??
 
   / BX1860 or 2360? #22  
Just keep in mind, the 1860 alone, dry, weighs almost 1300. Add fuel, mower deck, or FEL, quick hitch, etc and you'll easily push the limits on your ramp. Your 2200 bed capacity is well able. I might be concerned about lashing it down, but I am sure you have that figured out already. Best regards on your shopping.

I would only put in truck bed with mmm on. FEL would be too long, tailer only then. Thanks. Philip.
 
   / BX1860 or 2360? #24  
Are those larger tires? Looks like they are. Thought you could not get the larger ones to fit??

Yes, they are indeed the larger wheels and tires. Since I do not mow with an MMM, I like the increased traction and handling. If I needed to mow, I'd use a Rear Finishing Mower.

If you install a mid deck mower, your clearance will only allow the OEM wheels and tires.
 
   / BX1860 or 2360? #25  
I went thru the same process about a month ago,I knew the 1860 would suit my needs.The 1860 is slightly smaller than the 2360,after sitting on both of them I felt more comfortable on the 2360 and that is why I went with the 2360.
 
   / BX1860 or 2360? #26  
if you want the big wheels on a bx your adding $360.00 - $420.00 to the initial cost of the tractor. shrekbelly
 
   / BX1860 or 2360? #27  
if you want the big wheels on a bx your adding $360.00 - $420.00 to the initial cost of the tractor. shrekbelly

Actually, you can then subtract the sale of the OEM wheels/tires. About $350 on Craigslist. Net for the upgrade is only $40-80.

BTW, this isn't something the dealer will do at the time of sale, most likely. Do it a month later when you get 'er home. Order the wheels through Whole Goods. Sell the OEMs and you are set. (as long as you don't mow with MMM)
 
   / BX1860 or 2360?
  • Thread Starter
#28  
Heading down later today to make the final decision. My dealer has both in stock and the price difference is a grand. So with the larger tires and engine it is really a toss up for me. A grand will buy a lot of diesel though:D:D
 
   / BX1860 or 2360? #30  
Heading down later today to make the final decision. My dealer has both in stock and the price difference is a grand. So with the larger tires and engine it is really a toss up for me. A grand will buy a lot of diesel though:D:D

Yeah it will no more fuel than these things burn especially, but when figured over the number of years you will own it, it really is insignificant. Either will do all you need done, so you really can't go wrong; good luck.
 

Tractor & Equipment Auctions

NEW Work Saver Skid Steer/Sub Compact Grapple (A53473)
NEW Work Saver...
2016 Hitachi XZ300LC-6 (A47477)
2016 Hitachi...
2015 Big Tex 70PI 15ft Pipe Top T/A Utility Trailer (A50322)
2015 Big Tex 70PI...
2007 FORD F650 XL SUPER DUTY FUEL & LUBE TRUCK (A51406)
2007 FORD F650 XL...
2008 Chevrolet Silverado 2500HD Ext. Cab Pickup Truck (A52377)
2008 Chevrolet...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top