Comparison Powershift

   / Powershift #1  

rmully

Gold Member
Joined
Sep 27, 2007
Messages
441
Location
North Carolina
Tractor
YM 2020
Is powershift worth the extra money and does having it a cause for more mechanical problems down the road ?? Also what do you guys think of a YM2000 vs. a YM2010 ..if you had to choose which would you buy?

Thanks
Robert
 
   / Powershift #2  
The power-shift is worth the money if you're considering a FEL.

The YM2010 is an excellent tractor and the largest two cylinder Yanmar ever produced in the YM series.
 
   / Powershift #3  
Is powershift worth the extra money and does having it a cause for more mechanical problems down the road ?? Also what do you guys think of a YM2000 vs. a YM2010 ..if you had to choose which would you buy?

Thanks
Robert

Both are good tractors, I would take the YM2010 3cyl power shift over the YM2000 2 cyl gear drive.

Danny
 
   / Powershift #4  
mark777, sure glad to see you post again, hope it is a regular event. And as the dumbest one to post so far, yes the powershift is worth the money.
 
   / Powershift #5  
I sure do like my powershift. So much so that it would hard to imagine not getting it if I had the choice.
 
   / Powershift #6  
Best feature of my tractor besides the diesel engine wouldnt have it any other way now.

I really like the fact I dont have to stop the attachment by pushing in the clutch to move forward or reverse.

Steve
 
   / Powershift #7  
Welcome to the forum. I agree with the other folks.....powershift is worth every penny. I am a relatively new tractor owner.....have driven several in the past but never owned one. I am so glad my 186D has powershift. Makes life real easy with my FEL, saves the clutch. Make sure you have clean fluid......my tractor takes JD 303 or regular Dextron 3 trans. fluid works well. Keep your screen cleaned, make sure your filter is good.....have fun!:thumbsup:
 
   / Powershift
  • Thread Starter
#8  
Thanks everyone ... Powershift it is. One last question ...what is the difference between a YM2010 and a YM2210 all i can see is the the 2010 is 3 cylinder must be more that i don't see.
 
   / Powershift #9  
The 2010 has the 3t82b engine rated at 23hp, built in 80-81, weighs 1920lbs. The 2210 has the 2t90 engine rated at 25hp, built in 77, weighs 2085 lbs.
 

Tractor & Equipment Auctions

Hydraulic 50 mm pin thumb (A52384)
Hydraulic 50 mm...
Cat TH407C Telehandler (A53472)
Cat TH407C...
UNVERFERTH 210 LOT NUMBER 16 (A53084)
UNVERFERTH 210 LOT...
Takeuchi Skid Steer (A49461)
Takeuchi Skid...
2025 K1912 UNUSED Metal Livestock Shed (A53117)
2025 K1912 UNUSED...
2011 Nissan Frontier Pickup Truck (A53117)
2011 Nissan...
 
Top