What did you do at the 100 hours when I finally reach there in a year or so.
JT, I did not take pics but ... at 100 hours on my
BX25 I did the following:
1. Performed Engine start system checks to ensure tractor will not start and will kill the engine in all unsafe conditions or if you leave the seat with PTO engaged. [Page 72]
2. Grease spot under floor mat and battery terminals checking and cleaning all wiring and screens in the process. [71]
3. Checking all wheel bolts for the correct torque. [73]
4. Check battery condition [73]
5. Clean the air cleaner element and remove all dust, dirt & grass. [75]
6. Check both fuel filters and the condition of hoses & connections. [75]
7. Check the fan belt tension & reset it if needed. [76]
8. Adjust the HST neutral spring setting by resetting the adjustment to ensure the tractor stops moving when you remove your foot from the forward or reverse pedal. [76]
9. Adjust the brake pedal to ensure it works in the best depression range. [77]
and I also attached the back hoe and ...
10. Grease all spots on both my FEL and BH checking all points for wear all bolts for tightness and hydraulic lines for condition.
Basically, do what it says on pages 71 thru 77 of the manual!
