New 3320 pics

[Pushing_Tin]

Awesome pics and a fine choice of machines I might add. Sure wish I had the BH, just couldn't justify the price for how often I would use it.

 

[foggy1111]

Looks like a great set up! Nice pics. Enjoy!

 

[Nuru]

Good looking unit, congrats to you.

 

[Rob-D]

Thanks gang!

By the way I just reversed my back tires. (fronts don't do much as the front axle floats) Wasn't bad, I lifted it by the BH stabilizer arms and just touched them up or down until I could get the tires on the axle landing. My tires aren't loaded though. Took me about 45 minutes for the whole job. Looks like I gained about an inch or so overall.
I used a 3/4 bar, 7/8 socket and one of those 4 way tire irons.

My new distance from middle of tire to middle of tire is 44" almost exactly. If you have new wheels there's a rubber line so it's easy to find the tire center.
If someone has their wheels in the narrow position you can measure them and figure exactly how much you'll gain by doing the change.

Rob

 

[Nuru]

Thanks gang!

By the way I just reversed my back tires. (fronts don't do much as the front axle floats) Wasn't bad, I lifted it by the BH stabilizer arms and just touched them up or down until I could get the tires on the axle landing. My tires aren't loaded though. Took me about 45 minutes for the whole job. Looks like I gained about an inch or so overall.
I used a 3/4 bar, 7/8 socket and one of those 4 way tire irons.

My new distance from middle of tire to middle of tire is 44" almost exactly. If you have new wheels there's a rubber line so it's easy to find the tire center.
If someone has their wheels in the narrow position you can measure them and figure exactly how much you'll gain by doing the change.

Rob

My R4's are loaded and they are very tough to move. Even my Turf Specials require a bit of strength to more even though they are not loaded.

 

[Rob-D]

My R4's are loaded and they are very tough to move. Even my Turf Specials require a bit of strength to more even though they are not loaded.

Yes, Loaded tires are a bit to move around. I think you should have at least two people to move them.

Rob

 

[Nuru]

Yes, Loaded tires are a bit to move around. I think you should have at least two people to move them.

Rob

Oh no way with my ego, I can move them all, just very slowly:laughing:

 

[RoyJackson]

Oh no way with my ego, I can move them all, just very slowly:laughing:

Yeah, you can tell us about that ego when you're flat on your back with a herniated disk or two...

 

[sunnyside360]

Rob, congratulations on the new tractor. Like I always say, work will seem more like play but you already know that. Have you had a chance to give the 485 BH a good workout yet , and if so, what are your thoughts?

 

[Rob-D]

Thanks Sunnyside,

The BH should get a work out this week, I had to take it off to bush hog my fields. I'll give a full report on the hoe and the thumb as soon as I work it a few hours.

Rob