Dearborn 2 bottom model 10-1

   / Dearborn 2 bottom model 10-1 #1  

thl

Member
Joined
Jul 28, 2008
Messages
37
Location
Bridgeport Michigan
Tractor
Kubota B2150
I have a 1943 2n. It is in good running condition. Will it be able to handle a Dearborn 2 bottom model 10-1 plow? I found one today for $300. It is in good shape. Even still has the chains on it. It sat in a barn for a long time. Worth $300?

Comments welcome!

Terry
 
   / Dearborn 2 bottom model 10-1 #2  
if you buy it and it doesnt work for you, let me know, I may take it off your hands for you
 
   / Dearborn 2 bottom model 10-1 #3  
It is worth $300 as long as nothing breaks or wears out. Parts are not available at a reasonable price for that plow. Ken Sweet
 
   / Dearborn 2 bottom model 10-1 #4  
I have a Model 10-1 plow. I discovered that the frogs from an old sprung Leinbach 2 bottom plow that I had would bolt right up to the Dearborn plow shafts, so the wear parts that fit Leinbach plows (maybe Ford 101) will bolt to the Dearborn frame. I get my parts at my local Leinbach dealer. The parts are not a perfect fit, but very good fit. Mostly, the landside seems to not sit flat on the ground, but turn up towards the rear by about 2 or 3 inches, and no provision for the rolling landside. Doesn't seem to affect the plowing.
 
   / Dearborn 2 bottom model 10-1 #5  
yep.. you can get shares and whatnot for that plow still...

I'd offer 250..

soundguy
 
   / Dearborn 2 bottom model 10-1 #6  
yep.. you can get shares and whatnot for that plow still...

I'd offer 250..

soundguy

I could use a contact # for the supplier. I have a waiting list. I don't think my guys will pay $100 per share, Maybe $35 -$45. Ken Sweet
 
   / Dearborn 2 bottom model 10-1 #7  
I'll post over at ytmag.. I know plenty of people that have that plow and I hear them getting paerts for them commonly. I have a 10-1 as well.. but with good wear parts.

soundguy
 
   / Dearborn 2 bottom model 10-1 #8  
I'll post over at ytmag.. I know plenty of people that have that plow and I hear them getting paerts for them commonly. I have a 10-1 as well.. but with good wear parts.

soundguy

All I can find is The Amish Foundry willing to supply parts for a rebuild for $500. Ken Sweet
 
   / Dearborn 2 bottom model 10-1 #9  
will post back with what I find.

soundguy
 

Tractor & Equipment Auctions

2014 Toro Workman HD 07369 Utility Cart (A51691)
2014 Toro Workman...
2024 JOHN DEERE 6110M LOT NUMBER 56 (A53084)
2024 JOHN DEERE...
HYSTER H60XT FORKLIFT (A53843)
HYSTER H60XT...
2016 CATERPILLAR 249D SKID STEER (A52705)
2016 CATERPILLAR...
2018 FORD F150 XL TRUCK (A51406)
2018 FORD F150 XL...
2019 Doosan LCV6W Towable LED Light Tower (A51691)
2019 Doosan LCV6W...
 
Top