harpoonalt
Gold Member
Nice looking rugged building! Sure is flat in Texas
Not big, not pretty, but it is mine
- Thread starter ustmd
- Start date
- Views: 10470
Danno1
Veteran Member
Iplayfarmer
Super Member
To keep the post turtles off the fence!
.
That is funny on so many levels. :laughing:
OP
ustmd
Platinum Member
I could say that is my wife keeps them, but this is a somewhat family oriented group.:laughing:
The fence is around a garden and they are for decoration. I like putting some type of cap on a wooden post to keep water from pooling and spliting/rotting the posts. Even with PT posts, it can be an issue
OP
ustmd
Platinum Member
Nice looking rugged building! Sure is flat in Texas
Thanks...flat is all relative. I live on the edge of the "Hill Country" in Texas. If you want flat, you should see OK.
Sackett2
Platinum Member
nice looking building; i can see the recliner, big screen and beer fridge setting out there somewhere... Nice Man Cave...
77transam
Silver Member
Nice looking building USTMD. You're doing a great job.:thumbsup:
OP
ustmd
Platinum Member
Finally got the siding on last week.
I decided to go with vinyl. I thought about Hardi Plank, but I already had ~ two squares of the vinyl left over from the house, please the vinyl is much easier to work with.
I had the electrican out last Friday and he did a very professional job roughing out the building-did everything to IBC even though I do not have to have an inspection. He did it a very good price.
Next up insulation and drywall (oh my back)
I decided to go with vinyl. I thought about Hardi Plank, but I already had ~ two squares of the vinyl left over from the house
, please the vinyl is much easier to work with.I had the electrican out last Friday and he did a very professional job roughing out the building-did everything to IBC even though I do not have to have an inspection. He did it a very good price.
Next up insulation and drywall (oh my back)
Attachments
doall
Platinum Member
I bet those long gable cuts on the sides were tough if you were using snips to cut the siding. Looks good.
OP
ustmd
Platinum Member
Only used the snips for some small cuts.
Dor the long angle cuts, I used a paneling blade (in backwards) in the skillsaw.
For the cross cuts, I decide to bite the bullet and force myself to buy a sliding compound miter saw
