Just bought a 2011 Kubota L4400

[ssmith general]

There she is, dropped a cotter pin and got a little muddy on my first run around the property.

 

[TripleR]

Nice looking setup, I have a Land Pride RCR2672 which I used really hard last year, very tough piece of machinery.

 

[ssmith general]

Nice looking setup, I have a Land Pride RCR2672 which I used really hard last year, very tough piece of machinery.

Thank you.

That's what I had heard... Getting a lot of compliments of the bush hog.

That is the 6' heavy duty.

 

[TripleR]

Thank you.

That's what I had heard... Getting a lot of compliments of the bush hog.

That is the 6' heavy duty.

What is the model number on yours?

 

[bigbull338]

she sure is a nice looking rigg.i know youll enjoy driving her.

 

[ssmith general]

What is the model number on yours?

RCR 1872

 

[TripleR]

RCR 1872

That is a good model for that tractor and should do about anything you need done.

I put front and rear chains on my RCR2672 after running it for a little bit as I was mowing some really big saplings and didn't like all the stuff that was being thrown out. The chains really put an end to any concerns I had about flying objects.

 

[SmokemanGRP]

Nice looking rig !!! I debated between the L3800 and L4400 but chose the smaller machine.

 

[ssmith general]

Nice looking rig !!! I debated between the L3800 and L4400 but chose the smaller machine.

Thanks, I wanted to be sure and have enough HP to turn that big cutter real well.

 

[dex3361]

I have the HST version of this tractor and it has about 250 hours on it now. It has been flawless in operation. It sits low to the ground and maneuvers well in the woods. I use a 6 foot KK rotary cutter and it has the power to operate it just fine. I use less than 1 gallon per hour when working it hard. Enjoy your new machine.