Roll Call

clemsonfor · Jun 21, 2011

Thanks now we can go from here. It seems were slowing down on responses and will mabe pick up a few stragglers here and there for the next week or two. No way to count the lurkers which may be fairly high as well, maybe even owners in the count too.

California · Jun 21, 2011

clemsonfor said:
No way to count the lurkers

From the Main Index just now, TBN overall statistics:

"There are 509 members and 4951 guests online."

So for a best available rough guess, logged-in members are a tenth of total Yanmar forum readers.

phatgemi · Jun 21, 2011

Been a member a long time. Don't get on as much as I used too. Plus just burned out a bit on all the "pc" going on.

Have a YM2000 with Bush Hog QT1846 loader. Also have RS1400 tiller that came with the tractor (back in the day when they were $250 and ton's were available. Also run a 72 inch caroni finish mower for lawn. I run turf tires on back and have nice flat lawn.
Also have a 4 foot bush hog for keeping the rougher fields in order.

Have had my yannie for several years and it came from Lowes when they were in business in Greensburg. Man was it nice living 15 miles from a yannie heaven.....miss those days.

My tractor has basically been trouble free except for minor issues. Rebuilt water pump 3 years ago and for most part, that's it.......

Cougar300 · Jun 21, 2011

Jack here, Oshkosh, WI

Don't get on here a lot, it is a great site.

farmfun · Jun 21, 2011

Ray NE GA 3110D Here (or there )

Found this site BEFORE I bought and lurk/read now as then FAR more than post. Split time between here and the safety forum.

To prospective owners/shoppers:
The wisdom you'll draw from here will save you REAL cash, please heed with respect.

I thank those that help out the "newbies" and the not so newbies for that matter with equal care.:thumbsup:

garcol · Jun 22, 2011

Gary here from Washington state.
Bad about getting on here, too much to do these days.
Great site with tons of help and advice.

Army grunt · Jun 22, 2011

Every day..
Army Grunt

Car Doc · Jun 22, 2011

Like I said earlier there is one more on the way...my buddy's "new" YM1610D got dropped off at my shop last nite at 9 PM exactly when the driver said he would be here from near Dallas when he called yesterday morning!

We were absolutely amazed at his punctuality that is a loooong drive and then he turned around and headed back that guy is some kind of super driver!!!

I will let him fill in all the details if he wants to but I am letting the cat out of the bag its a sweeet little machine I like it a LOT it is tight everywhere no slop in anything!

I got it until Saturday to play with it so I will make the most of it while I can.

California · Jun 22, 2011

my buddy's "new" YM1610D got dropped off at my shop last nite

That must be a popular model.

I saw one appear on Craigslist this week in a remote corner of California. Far North Coast, logging country, a day's drive from any major population center. His description amounted to 'runs, shabby. Has loader'. Asking $3650. It disappeared off Craigslist in one day.

The other one I see on CL is listed at $8500.