My cheap pole shed.....

   / My cheap pole shed..... #1  

HCJtractor

Veteran Member
Joined
Jan 28, 2009
Messages
1,519
Location
upstate South Carolina, Greenville
Tractor
Kubota M6800, Massey Ferguson 240
I needed a roof for my toys, and none of my buddies were ever able to offer much help, so I built this with very little help. I did not have electricity, so all was done with 18V tools. I wanted to minimize costs also. Someday, I may pour a slab and wire this if electricity is delivered, and maybe even enclose it. But for now, it keeps the rain off. I also collect rainwater of the roof into a cistern for washing implements.

Compared to some of members fancy outbuildings, I am somewhat reluctant to show this, but for those of you who like rustic and cheap, here it is.
 

Attachments

  • DSC01102.jpg
    DSC01102.jpg
    847.1 KB · Views: 1,662
  • DSC01127-1.jpg
    DSC01127-1.jpg
    825.9 KB · Views: 1,126
  • DSC01099.jpg
    DSC01099.jpg
    642.2 KB · Views: 785
  • 100_2801.jpg
    100_2801.jpg
    678.7 KB · Views: 1,129
  • DSC01101.jpg
    DSC01101.jpg
    975.9 KB · Views: 4,907
   / My cheap pole shed..... #2  
I like it. Did you have plans or did you just "wing it"?
 
   / My cheap pole shed.....
  • Thread Starter
#3  
I looked at a book on sheds that was on the shelf at Home Depot, and used some ideas from that, but basically, just winged it from there. Found the galvanized cross braces at my local scrap yard for $2.00 each, and thought they were easier to attach and cheaper than 2x4s. The whole thing is connected with 1/2" lags or bolts, and screws. I did not use any nails. I love my little Makita impact driver. I originally planned to side it with vertical board and batten green roughcut lumber, but decided without electricity, it would be too dark inside.
 
   / My cheap pole shed..... #4  
Hey, that is really a nice structure! I'm impressed-nothing wrong with rustic in my book. I like the way you've done the area under the eaves, and especially the horns! Is that a hammock I see under there?

GGB
 
   / My cheap pole shed..... #6  
...I originally planned to side it with vertical board and batten green roughcut lumber, but decided without electricity, it would be too dark inside.

For little money you can get a cheap solar charger and a deep cycle battery that will power enough flourescent lumens to set you up nicely. I guess it depends on how much time you spend there. If you spend more than a day or so at a time you may need a few batteries.

Nice shed, though.
 
   / My cheap pole shed..... #7  
I would be proud to have that!! Great job.
 
   / My cheap pole shed..... #8  
Absolutely appreciate the photos..very nice. Really helped me on ideas. You did good!

Jim
 
   / My cheap pole shed..... #9  
I needed a roof for my toys, and none of my buddies were ever able to offer much help, so I built this with very little help. I did not have electricity, so all was done with 18V tools. I wanted to minimize costs also. Someday, I may pour a slab and wire this if electricity is delivered, and maybe even enclose it. But for now, it keeps the rain off. I also collect rainwater of the roof into a cistern for washing implements.

Compared to some of members fancy outbuildings, I am somewhat reluctant to show this, but for those of you who like rustic and cheap, here it is.

That's one nice toy shed. Excellent carpentry.:thumbsup:

I built my equipment shed 2 years ago the same way--by myself with 18V tools (mostly).

DSCF0090 (Small).JPG

Mine is a few notches below yours in terms of fanciness.:eek:
 
   / My cheap pole shed..... #10  
I think it looks great!
 

Tractor & Equipment Auctions

2012 Ram 3500 Chassis Pickup Truck, VIN # 3C7WDTAL9CG134341 (A51572)
2012 Ram 3500...
LMC LOT NUMBER 139 (A53084)
LMC LOT NUMBER 139...
JOHN DEERE 2038R LOT NUMBER 175 (A53084)
JOHN DEERE 2038R...
HARDEE RD72M LOT NUMBER 158 (A53084)
HARDEE RD72M LOT...
2012 JOHN DEERE 410K BACKHOE (A51246)
2012 JOHN DEERE...
TITAN - SET OF 18.4R46 NEW AG TIRES (A52748)
TITAN - SET OF...
 
Top