KINCO SICKLE BAR MOWER

[cookdog]

Hi, I'm a farmer in North Florida. I raise slash pines for pulp wood and am not happy to see all the recycling idiocy as trees are a crop and a commodity. So, use more paper and I sell more trees!

I recently bought an old KINCO 38 inch sickle bar mower. It runs great, but needs tube for the tires AND a replacement drive belt. My question is, HOW do you install the belt?

Who and where can I get a service manual for this equipment? Mine has a 4HP Briggs & Stratton engine, which runs super! Also, my mower tines are in good shape too, but since I will mow between trees and under fence lines, I imagine that sooner or later I will need to replace the tines. Any help would be appreciated.

 

[Muhammad]

Welcome to TBN.

 

[CompactTractorFan]

Welcome to TBN!!! You might try the Parts/Repairs section. :thumbsup:

 

[Briana03]

Hey there! Welcome to TractorByNet! I have moved your thread to Parts/Repairs Forum. You will have better luck finding assistance there.

 

[goatherder]

Hi, I'm a farmer in North Florida. I raise slash pines for pulp wood and am not happy to see all the recycling idiocy as trees are a crop and a commodity. So, use more paper and I sell more trees!

I recently bought an old KINCO 38 inch sickle bar mower. It runs great, but needs tube for the tires AND a replacement drive belt. My question is, HOW do you install the belt?

Who and where can I get a service manual for this equipment? Mine has a 4HP Briggs & Stratton engine, which runs super! Also, my mower tines are in good shape too, but since I will mow between trees and under fence lines, I imagine that sooner or later I will need to replace the tines. Any help would be appreciated.

How much did you pay for it? And what condition was it in?

 

[Tombreuer]

I do how much do you want for it
Tom

 

[Tombreuer]

I do how much do you want for it
Tom

I need one how much do you want for it

 

[TMR]

How are those mowers at cutting on a sidehill? Like on a normal road ditch? I have nearly one mile of ditch that is not toooo steep that wife want the grass/young brush cut a couple of times a year??

Sorry...a bit OT...TMR

 

[redd100]

:thumbsup:Just bought Kinco KMG38 mower at auction. Need to find manual and/or parts list if possible.

Thanks

 

[TheHun56]

If you have a B & S engine find the model number on the engine itself and then go to this website; Lawn Mower Parts | Small Engine Repair | Lawn Mower Repair type it in and look around till you find parts listing and prices. I used the site many times to buy parts for my KMG38 B & S engine. Good luck. I know my engine well and can help you if you have the same as mine. here is my engine info, remember yours might be different.

If you have a Tecumseh engine they have the same system on their own site for parts look-up and pricing!

Ex:
B & S 4 Hp I/C
Model: 114982
Type: 0148-01
Code: 86030604
Vertical shaft with auxiliary side shaft facing left if your looking down onto the engine while holding the handle bars.... Hope it helps