JD 4520
Platinum Member
This is great. Would love to know what it cost for materials. If I built this it my wife may make it into my bedroom. Very nice.
Show us your shop building
- Thread starter duanekeys
- Start date
- Views: 29437
This is great. Would love to know what it cost for materials. If I built this it my wife may make it into my bedroom. Very nice.
cmhyland
Platinum Member
Gary,
We had to take down an old small building and did some sitework so that cost some money... The building is small 18X20 because I had limited space in that area...
On small buildings it's all about proportions that make it pleasing to the eye...
The building was put up 8 or 10 years ago and at the time the total came to about 23K.
These are the guys who built it... Also I added a few more pics.
Sigfridson Wood Products
Regards,
Chris
Attachments
Last edited:
Bison
Platinum Member
Seems to me a lot of money for that small a building
grsthegreat
Super Star Member
cmhyland
Platinum Member
I agree it was expensive.... but like I said we had to take down another building and do some sitework... that was about 5K of the price... two 30 yrd dumpsters came to $1500.
Also I had it built... I didn't build it myself so that is more money and post and beam cost more than stick building...... Foundations aren't cheap up here... 4 ft deep...
Finally when you have a nearly 300 yr old house you can't put up a steel building where you get high Sqft for the price...
Regards,
Chris
cmhyland
Platinum Member
we built this for 34,000 a few years ago, incl all cept elect (im an electrician). its 30x60 plus 10x20 lean to. lots of windows, 2 roll up doors and 1 sliding door, 1 man door.
That's a really nice shop.....
Mickey_Fx
Veteran Member
Lots of nice shops being shown. Especially nice when one doesn't have one or is dreaming of something a little nicer.
Since this is an older thread and fact I didn't go through all the posts, hope this isn't a dup post.
We moved this past yr and one of the extras that helped sway our decision was the shop. WAY nicer than what I had at the old place.
The shop is 30 x 60 with (2) bays bumped out to 40' deep. Wired for 200A service. Internally the (2) bays on the left are separated from the other bays. There is a large sliding door inside for passage between the 2 bays on the left and the rest of the shop. There is a full bath and setup for an RV, power, water, sewer. Floor is concrete being 6" thick for the 2 bays and 4" thick for the remainder.
Still haven't gotten things arranged as I would like. When we bought, insurance appraised the building @ $100k. When we purchased, the wife told me there was also a house on the property.
In the one pic you can see the other extra that helped sway the decision.
Since this is an older thread and fact I didn't go through all the posts, hope this isn't a dup post.
We moved this past yr and one of the extras that helped sway our decision was the shop. WAY nicer than what I had at the old place.
The shop is 30 x 60 with (2) bays bumped out to 40' deep. Wired for 200A service. Internally the (2) bays on the left are separated from the other bays. There is a large sliding door inside for passage between the 2 bays on the left and the rest of the shop. There is a full bath and setup for an RV, power, water, sewer. Floor is concrete being 6" thick for the 2 bays and 4" thick for the remainder.
Still haven't gotten things arranged as I would like. When we bought, insurance appraised the building @ $100k. When we purchased, the wife told me there was also a house on the property.
In the one pic you can see the other extra that helped sway the decision.
Attachments
grsthegreat
Super Star Member
Lots of nice shops being shown. Especially nice when one doesn't have one or is dreaming of something a little nicer.
Since this is an older thread and fact I didn't go through all the posts, hope this isn't a dup post.
We moved this past yr and one of the extras that helped sway our decision was the shop. WAY nicer than what I had at the old place.
The shop is 30 x 60 with (2) bays bumped out to 40' deep. Wired for 200A service. Internally the (2) bays on the left are separated from the other bays. There is a large sliding door inside for passage between the 2 bays on the left and the rest of the shop. There is a full bath and setup for an RV, power, water, sewer. Floor is concrete being 6" thick for the 2 bays and 4" thick for the remainder.
Still haven't gotten things arranged as I would like. When we bought, insurance appraised the building @ $100k. When we purchased, the wife told me there was also a house on the property.
In the one pic you can see the other extra that helped sway the decision.
Thats a cool shop.....
two_bit_score
Super Star Member
- Joined
- Dec 22, 2008
- Messages
- 10,983
- Tractor
- John Deere 110 TLB, Diamond C 19LPX GN trailer
He is in CT. And we haven't seen the inside.
jbos333
Bronze Member
Hey grsthegreat,
Maybe I missed it, but could I ask what is you sidewall height? Roof pitch? Lean-to distance from side of building to inside of post?
What you have on your building there seem to be perfect proportions...I recently got a quote on a 30x40 with a 12x40 lean to and if it came out proportioned like yours, that would be great!
Thanks!
Maybe I missed it, but could I ask what is you sidewall height? Roof pitch? Lean-to distance from side of building to inside of post?
What you have on your building there seem to be perfect proportions...I recently got a quote on a 30x40 with a 12x40 lean to and if it came out proportioned like yours, that would be great!
Thanks!
