Hello everyone , while doing a search for info I found your site. I have a 2000 or so NH TC29D with a 7380 loader. I just bought a Quick Coupler and snow blade w/angle. So I was looking for info on how to hook the hydrolics up for the snow blade. We just put chains on the front of the tractor and installed the Quick Coupler. Now too hook the snow blade up and hydrolic hoses. I think my idea is not going to work so I'll have to take some time and digg around in here to see.....................anyway Hi everyone.:thumbsup:
Newbie saying Hello
- Thread starter ERABBIT
- Start date
- Views: 398
Welcome to TBN. 
grsthegreat
Super Star Member
I have a Kioti dk45 and i have added a quick attach snow blade. I simply ran a long set of hoses to the rear remotes and control the blade with the rear remote control. do you have a set of rear remotes?
oh, and hello and welcome
oh, and hello and welcome
grsthegreat
Super Star Member
Thanks for the HIs, no I don't have a remote on my tractor , I'm having hoses made up and hooking in to the tilt/roll for turning the blade but will not beable to tilt it with this hooked up that way !!!!
they do make an electric splitter valve for this. some people have posted about them on this forum.
Thanks That's sounds like a plan but I'm hooked up now works OK after three trips back to where I bought the blade... but I will look into to that valve Thanks again.