rzastoupil
New member
- Joined
- Nov 9, 2011
- Messages
- 1
- Tractor
- kubota
tapping into high pressure line on a kubota tractor
adding a grapple bucket
- Thread starter rzastoupil
- Start date
- Views: 1504
Welcome to TBN. 
creekbend
Super Star Member
:tractor::welcome:
Yes...
k0ua
Epic Contributor
Teg, you dont reckon he did it with the tractor/pump running and he is no longer with us?
James K0UA
k0ua
Epic Contributor
I am just kidding of course, I assume computer failure not a facefull of fluid. And I realize that the pressure is probably not deadly in an open center system unless the flow is pushing against something like a cylinder. but still it makes you wonder what happened to him.
James K0UA
James K0UA
k0ua, I was laughing even before reading your punch line... Maybe another "one time poster"... :confused2: Last Activity: Today 05:24 AM
As for the OP (original poster), yes, you'll have to put a valve spool in between the Front End Loader (FEL) and the hydraulics for the 3 point hitch (3ph). You can look how I did mine with the link in my signature.
What tractor are you talking about doing this to?
Maybe another "one time poster"... :confused2: Last Activity: Today 05:24 AM As for the OP (original poster), yes, you'll have to put a valve spool in between the Front End Loader (FEL) and the hydraulics for the 3 point hitch (3ph). You can look how I did mine with the link in my signature.
What tractor are you talking about doing this to?
Briana03
Elite Member
WELCOME to TBN
I moved your thread to the Attachments Forum.
I moved your thread to the Attachments Forum.
Glen Watkins
Gold Member
- Joined
- Dec 19, 2009
- Messages
- 491
- Tractor
- 2007 John Deere 4320 Cab Tractor
That's why. He lost his post!:laughing:
