Most important hydraulic functions in the 110

[AKfish]

M59 is a nice machine. I was looking at them but they were a little much money and a little large for where I want to go with it. I don't think the MT machine has all the rear aux hyd for a TnT system but MtnViewRanch guy on here said he could hook me up with what I needed for a TnT system so I'm not super worried about those hyd for a TnT. I would like the other hyd more as they look a lot better. As far as buying new goes the boss may leave me with everything besides it!:laughing: Would like a new but wife's not taking the bait

Sounds like you've got more than enough on your plate - without jumpin' at a new/newer JD110!!

Times are best when you can take a direction at your own pace...

FYI - when looking thru some of the used machines on www.machinefinder.com; I noticed that one listed the 7-function hydraulics on the backhoe - but... indicated that it was fitted with a pin-on bucket.

You cannot - cannot - install a hydraulic thumb on a pinned bucket. Must be a Q/A bucket. That would likely add another $1K-$2.5K to the cost.

AKfish

 

[AKfish]

Here ya go!! Little high on time... but, not a bad lookin' machine! Needs the 3pt hardware or TopnTilt. Has got everything else. High approval for seller, too!

John Deere 110 Tractor Loader Backhoe with Hydraulic Thumb, 3 Point Hitch, 4wd | eBay

AKfish

 

[jenkinsph]

Here ya go!! Little high on time... but, not a bad lookin' machine! Needs the 3pt hardware or TopnTilt. Has got everything else. High approval for seller, too!

John Deere 110 Tractor Loader Backhoe with Hydraulic Thumb, 3 Point Hitch, 4wd | eBay

AKfish

The description sounds like it already has the topntilt (hydraulic hitch) I would call to verify this though. It does have the full version of hydraulic add ons with the auxillary lines to the fel, 3 remotes on the rear and 7 function backhoe with thumb.
Sounds like a machine of interest for anyone looking for a 110tlb imo.

 

[Martian]

Here ya go!! Little high on time... but, not a bad lookin' machine! Needs the 3pt hardware or TopnTilt. Has got everything else. High approval for seller, too!

John Deere 110 Tractor Loader Backhoe with Hydraulic Thumb, 3 Point Hitch, 4wd | eBay

AKfish

Thats looking more my way. It does seem like it would have a TnT system. Not to concerned about the hours as long as she runs and taken care of. I'll be calling this guy for sure.

 

[DocDryden]

Thanks Akfish for all the useful info, I don't have a jd 110 yet but I hope to get one in the near future

 

[Martian]

Thanks Akfish for all the useful info, I don't have a jd 110 yet but I hope to get one in the near future

Welcome Doc Dryden!

You might want to take a look at this old thread of mine as well (http://www.tractorbynet.com/forums/buying-pricing-comparisons/227949-john-deere-110-vs-kubota.html). My 110 is coming Monday and that was the thread. Has everything you can possibly imagine 110 in it.

Good luck!

 

[AKfish]

Thanks Akfish for all the useful info, I don't have a jd 110 yet but I hope to get one in the near future

Well... thank you. And glad to hear that you're interested in the 110TLB. Much to talk about and share information.

AKfish

 

[DocDryden]

Thanks Martin, I will take a look at that thread, and good luck Monday with your JD 110TLB. let us know how it works out.

 

[Martian]

Will do Doc,

Just reading through this thread, how lucky I got!