Smashed GN trailer into back of my 5058M :(

   / Smashed GN trailer into back of my 5058M :( #81  
You normally reuse the seal when replacing a window. I just did the side window on my MF on the weekend. About 20 minutes with the needle nose pliers to get all the glass out, most of it breaks up, only the last pieces have to be pinched out.
 
   / Smashed GN trailer into back of my 5058M :( #82  
I doubt Dealer would spend the time and will just use a new gasket.
 
   / Smashed GN trailer into back of my 5058M :( #83  
Ouch! - Yes thanks goodness you came out fine

DF
 
   / Smashed GN trailer into back of my 5058M :( #84  
Even the mice are showered and dressed nice!:laughing:

Yep, the shop is way too clean.

I could "fix" that for him. Wouldn't take long at all. :D
 
   / Smashed GN trailer into back of my 5058M :( #85  
Yep, the shop is way too clean.

I could "fix" that for him. Wouldn't take long at all. :D

Deep in the back of my mind I think...my shop will be that clean! Unfortunately, reality kicks me in the groin and says what a pig sty you have created.:(
 
   / Smashed GN trailer into back of my 5058M :(
  • Thread Starter
#86  
Lol. Well, it does not always look that clean. Here are some past pics of it "in use":

nowheels-2.jpg


shop021612-1.jpg


whatamess.jpg


But way back 10 years ago when I first built it, it was really clean and there were no stains on the floor yet! I must say though that UCoat-It concrete sealer I used has held up well over the years.

Truck%20&%20Shop%20Shot.jpg
 
   / Smashed GN trailer into back of my 5058M :(
  • Thread Starter
#87  
You need to register at JDparts.com then you can look up and price parts. I come up with $2732.17 Your dealer may have a different price.
Thanks. I had forgot that I registered there years ago. Still had a full shopping cart from when I was pricing out a 3rd function hardline kit for my 460 loader!

My price for that item is a little higher at $2,868.78. Interesting that the price varies depending on, what I assume, must be the state you're in?

Haven't heard back from the dealer yet. Will call them today for an update on where they are with the claim.
 
   / Smashed GN trailer into back of my 5058M :( #88  
A while back several of us compared notes and found the price for parts varies with which dealer you are registered on JDparts.com.
 
   / Smashed GN trailer into back of my 5058M :( #89  
Lol. Well, it does not always look that clean. Here are some past pics of it "in use":

nowheels-2.jpg


shop021612-1.jpg


whatamess.jpg


But way back 10 years ago when I first built it, it was really clean and there were no stains on the floor yet! I must say though that UCoat-It concrete sealer I used has held up well over the years.

Truck%20&%20Shop%20Shot.jpg

Still cleaner than mine! That is merely cluttered.
 
   / Smashed GN trailer into back of my 5058M :( #90  
A while back several of us compared notes and found the price for parts varies with which dealer you are registered on JDparts.com.

I agree.
 

Tractor & Equipment Auctions

2020 FORD F-250 SUPER DUTY (A52472)
2020 FORD F-250...
Genie GTH-844 (A50120)
Genie GTH-844 (A50120)
2016 Ford Escape SE AWD SUV (A50324)
2016 Ford Escape...
2017 Ford Escape SUV (A50324)
2017 Ford Escape...
EZ-GO Electric Golf Cart (A50121)
EZ-GO Electric...
2009 Dodge Ram Utility Pickup Truck, VIN # 3D6WC78L09G558300 (A51572)
2009 Dodge Ram...
 
Top