Loader how to measure a fel capacity

   / how to measure a fel capacity #21  
That bucket is essentially a semi-circle...I have a hard time believing it is 2/3 CY when only 4.5' wide. Also a striange design...looks like a bucket was extended with another bucket.
 
   / how to measure a fel capacity
  • Thread Starter
#22  
Yeah, I bought the tractor used and a previous owner welded on some extra metal. It works out well for me cause I can get a good size load of potting media in during potting up time. I just never thought to measure it in cubic yards till now.
 
   / how to measure a fel capacity #23  
Without knowing the depth of the bucket at the top, height from floor of bucket to top lip, and at least 1 of the angles (either from cutting edge to top lip, or back of bucket bottom to top angle) it is next to impossible to figure the side profile surface area.
Just and FYI, I looked up heaped capactity for a 56" general purpose bucket in Bobcat site it is listed as 9.4 cubic feet = .35 yds.
 
   / how to measure a fel capacity #24  
Lay out a one inch grid on a large piece of cardboard with a pencil and ruler, tape the cardboard to the end of the loader with double stick tape and trim off the excess. Count the number of one inch squares, multiply that by the width of the bucket. That will give you cubic inches. Convert cubic inches to cubic feet by dividing by 1728.
 
   / how to measure a fel capacity
  • Thread Starter
#25  
There has been a lot of great ideas posted. So far the ones I try come up with about .80 of a yard. I like the graph paper idea as well. Still waiting for the mulch shipment to arrive so I can measure with the actual product. Just as an FYI, around here a yard of mulch is anywhere from 22.00 to 25.00. One place with a 2/3 bucket gets 16 for a scoop.
 
   / how to measure a fel capacity #26  
I agree with SDKUBOTA 2/3 yd is a bit much for the width - my bucket is 54" round back and heaped its 8.1 CU FT but yours is higher and has the extensions - I would bet is just about a half yard or 13-14 CU FT.

Let us know your results!

Carl
 
   / how to measure a fel capacity #27  
I agree with SDKUBOTA 2/3 yd is a bit much for the width - my bucket is 54" round back and heaped its 8.1 CU FT but yours is higher and has the extensions - I would bet is just about a half yard or 13-14 CU FT.

Let us know your results!

Carl

We should have started a pool with the winner receiving a bag of cow manure!:D
 
   / how to measure a fel capacity #28  
We should have started a pool with the winner receiving a bag of cow manure!:D

Nah - I want a whole scoop! The delivery is the hard part - i suspect its pickup only..

My official guess 13.5 CU FT (Heaped)
 
   / how to measure a fel capacity #29  
Put me down for 16 CF (Heaped)
 
Last edited:
   / how to measure a fel capacity #30  
is this like "the price is right"? whoever is the closest without going over.
 

Tractor & Equipment Auctions

1985 Kentucky 48 ft. Dry Van Trailer (A50860)
1985 Kentucky 48...
2005 Ford Freestar SE Van (A48082)
2005 Ford Freestar...
ALL ITEMS NOT PICKED UP IN 30 DAYS WILL BE RESOLD FOR STORAGE!! (A50775)
ALL ITEMS NOT...
2015 FORD F-250 XL SUPER DUTY TRUCK (A51406)
2015 FORD F-250 XL...
2021 Ram 1500 Classic 4x4 Crew Cab Pickup Truck (A48081)
2021 Ram 1500...
Miller Millermatic 251 Welding Machine (A50860)
Miller Millermatic...
 
Top