8N Tire and Wheel Question
- Thread starter spotco2
- Start date
- Views: 24066
JoeBuyer
Banned
- Joined
- Dec 11, 2011
- Messages
- 698
- Tractor
- L5450
spotco2 said:
As long as it takes for a stick to puncture that tube. I know R4s have less traction, but I sure like not having to worry as much about them getting damaged.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
is that actually the tube.. or just the inner section of the casing? from my SMALL pic/screen.. it just loks like part of the tire
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
that's what I thought i saw.... He's still got decades left maybee 
... I have tires as bad. IE.. part of outter casing crumbled off.. inner holding fine.. tube still very well protected.
... I have tires as bad. IE.. part of outter casing crumbled off.. inner holding fine.. tube still very well protected.
JoeBuyer
Banned
- Joined
- Dec 11, 2011
- Messages
- 698
- Tractor
- L5450
Yeah I guess you are right. I didn't zoom in. Plenty of life left there.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
i had to ask as I use a mobile device with small screen... I have a barn full of oldies, and was pretty sure it was just the top layer gone.. but couldn't tell without asking with the small screen I was looking at.
